597 Products for Hoover Vacuums
-
steam cleaner repair
ITS THE DUCT PIECE ON THE FRONT OF THE DIRTY WATER TANK (DWT). ITS NOT LINED UP. 1. TAKE LID OFF OF DWT2. SLIDE THE LITTLE SQUARE...
bill carty- May 21, 2012
- Vacuums
- 1 Solution
-
brushes not spinning
The Hoover SteamVac's are notorious for this exact problem. There are several things that can be causing this probelm.First,...
Glenn Howarth- May 17, 2012
- Vacuums
- 1 Solution
-
I can't find the manual for my turbo steamvac...
go www.fitness.manualsonline.com or www. retrevo.com or www.manualsfactory.comfinally you must go to Hoover.com and downloadGod...
-
my hoover steam vac spinscrub f5915100 wont...
ITS THE DUCT PIECE ON THE FRONT OF THE DIRTY WATER TANK (DWT). ITS NOT LINED UP. 1. TAKE LID OFF OF DWT2. SLIDE THE LITTLE SQUARE...
- mkelley4864
- May 4, 2012
- Vacuums
- 1 Solution
-
Hoover U8315960
here is the manual will give you step by step instructions how to change belthttp://hoover.com/file/525/
-
cannister removal
you can get the manual off this link or watch a video how to usehttp://hoover.com/support/video-instruction-guides/
L A Simmons- Apr 23, 2012
- Vacuums
- 1 Solution
-
My Hoover floor mate will not spray
here's the manual > http://hoover.com/file/682/
dadormomskin- Apr 20, 2012
- Vacuums
- 1 Solution
-
Can any of the filters for this vacuum be washed?
THE PAPER ONES NEED REPLACEING THE SPUNGE ONES CAN BE WASHED THIS LINK IS FOR THE...
Deborah Barajas- Apr 17, 2012
- Vacuums
- 1 Solution
-
attachments and solution
here is your diagram hope it helps you.http://www.ereplacementparts.com/hoover-f5914900-steamvac-with-clean-surge-parts-c-37315...
-
hoover upright vacuum lost suction
sounds like the impeller blades have broken off therefore no suction it needs to go to repair shop
- Louis Payton
- Mar 30, 2012
- Vacuums
- 1 Solution
