http://www.fixya.com/support/hobart/dishwashersSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 11 Nov 2009 01:55:22 GMT80http://www.fixya.com/support/t2812684-am_getting_wrench_symbol_code_p2I am getting a wrench symbol and code P2.Can you tell me what this meansWed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t2516986-lx30h_hobart_dw_booster_will_not_turnlx30h hobart dw. booster will not turn on. element good,hi-limit is good, changed temp probe, still no power to contactorWed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t1894851-hobart_am14c_faulty_ccc_294551bFor a HOBART AM14C I have a faulty ccc (294551B). I received CCA (749825) Did I receive the correct board? They do not look even remotely the same.Wed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t1506575-p3_code_hobart_am15_dishwasherwhat does the wrench and p3 code on a hobart am15 dishwasher stand forWed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t3308042-hobart_dishwasher_leaking_as_rinsesWe have a Hobart dishwasher in our K of C hall that leaks every time fill water is going into the unit or as it rinses. I have some pictures of the control box, the unit itself, and the pipes and valves at the rear of the unit that are leaking that I...Wed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t2875742-buy_solenoid_gasket_littlewhere can I buy a solenoid gasket (the little rubber part that controls the water inlet) for a hobart am-14 warewasher? They seem to be a hard part to source.Wed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t2801158-temp_hottemp. on the rinse too hot (95 d C).How can i adjust it lower (85 d. C)Wed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t2398073-just_purchased_used_lxih4_temp_diplayfirst run went to 170f but susequent load only went to 155 unit is fed with 120f supplyWed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t1929231-as_soon_as_turn_power_starts_fillHobart lt1 Why is it filling before the cycle begins?Wed, 11 Nov 2009 01:55:22 GMThttp://www.fixya.com/support/t438403-get_lower_door_gasket_hobart_sr24cHello, The dishwasher leaks out both lower corners of the door whenever we run it. The gasket on the lower part of the door is completely gone. Where do I get a new one?Wed, 11 Nov 2009 01:55:22 GMT