Support, Manuals & Customer Service
Support, Manuals & Customer Service
238,556 people viewed this brand
It is so common that the drain leaks in many ways and is the most problematic fault in a washing...
liltapaniIf your bowl turns freely bearings are not seized, Your rotor position sensor must be faulty &...
Sandra Mcmaster
these machines must be truck from the front & transported in the upright position, it may be...
Wendy HutchisonA link to service manuals SMARTDRIVE WASHING MACHINE SERVICE MANUAL F&P Service manual...
Steve Wells
Does your machine have a diverter valve, If it does the valve is stuck in recirculate mode. Lint has...
Charles GravenHi Paul Sounds like the rotor position sensor is faulty.
Paul TzotzisHi, it may have blown the 4 amp fuse in the motor controller board.
Richard jaggeryour display or pump could at fault here. measure resistance at pump, if resistance in less than 33...
Alex Palmazthe clear pressure tube is blocked, you need to blow air down the clear pressure tube hose.
arox222It is possible that the machine does not start off the cycle because there are errors due to...
lukeandamy
Loading... 
