http://www.fixya.com/support/ficSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 08 Jan 2009 00:01:57 GMT80http://www.fixya.com/support/t1386418-sheba_cr61_will_not_power_upI have tried a new power cord. I can I tell if there is a problem with the internal power supply?Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t192533-montor_power_not_workingMOTHER BOARD IS A FR33E i DONT KNOW WHAT HAPPED TO IT, i WAS HIGH AT THE TIME AND IT DID ONLY A PARTIAL BOOT, THEN iT WOULDN'T COME UP AT ALL, THE MONITOR WENT DEAD. i REINSTALLED ALL THE HARDWARE, TRIED ANOTHER BOARD , IT WAS BAD, PUT MINE BACK, NOW...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t133903-cannot_find_optical_drivesThe system loaded windows xp pro with no problems. However, when I wento to my computer, it does not see my 2 DVD drives. I have swapped where the cables plug into the mother board. Any ideas? When I go to the bios by hitting F2, it does not see the...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t1456372-award_bootblock_v1_0Hi, can anyone help me this problem: Award Bootblock V1.0 please insert bootable disket My m/b: iwill vd 133pc Ppi/pnp 686 Thank youThu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t1395314-jumper_settings_amd_550_mhz_k6_2_chipI have a FIC VA 503+ motherboard and need the Jumper settings for an AMD 550 mhz K6-2 chip. I also need to know where I can get an ATX power switch for an ATX power supply for this board.Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t1388240-ram_memoryI have a computer with a FIC VI13L Motherboard, that is suppose be capable of supporting up to 3GB of memory. But when I install 2 1GB memory sticks reports "Insufficient memory to initialize Windows." Any suggestions?Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t1071670-power_sw_not_connectedi need the manual to connect the power and hdd led to motherboardThu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t910787-need_maualI had this board a few years and lost the manual to it. Want to put it in another computer case. Don't know how to hook up the case switches.Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t496411-motherboard_vc35I have to replace my Hewlett Packard vc35 motherboard, can anyone suggest a compatible motherboard as I am finding it difficult to find a straight replacement.Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t322963-emachines_w1500_video_problemsI have a computer that I am trying to fix for a friend, his wife decided to clean it and well now I have it to fix, here is the problems that I am running across, it will power up just fine and it sounds like it is accessing the hard drive but I have...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t299011-emachine_w3052_fic_k7mnf_64_moboI need the Multimedia Audio Controller. Just installed Vista Ultimate and this is the only fly in the ointment......so to speak :-)Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t289718-pentium_4_ht_core_2_duo_upgrade_lga_775My system has a FIC P4M 915 PDI motherboard. Can I upgrade to a Core 2 Duo keeping the same motherbard? If not, which motherboard would be best to repalce mine? Keep in mind my computer is a MCE410 Media Center with a low profile horizontal cabinet.Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t192797-fic_am37_manualI am looking for the manual or guide for a fic am37 motherboard. i'm not sure where to hookup the power and the restThu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t183658-ic_vg61_need_driversMicrosoft sp 2 update crashed my computer and I need drivers to re image the computer; anyone know how to get these drivers?Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166289-fic_k8_800t_motherboard_defective_rateHi, Either I screwed up, or my FIC K8-800T motherboard is defective. This is my first time upgrading a mobo, so it could be me. Anyway, does the K8-800T have an above average defect rate ? Thanks for your time. Steve, (remove the obvious)Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166270-fb11_problemHave a FB-11 running Intel Celeron 533 (not overclocked) and 128 megs of memory. System runs okay and then crashes ( no certain software). Installing teh First Aid that came with the motherboard, I have received system warnings when the...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166262-ka_6110_intel_600eb_problemafter upgrading from Cel 400 @ 66mhz to Intel 600EB @ 133 mhz my motherboard will not boot, It keeps dumping the registry. the only way i can boot my computer is to lower the CPU to 124 X 4.5. Anybody have any ideas T.I.A.Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166249-new_mainboard_queryHi, I have 2 queries first I want to change the motherboard and memory only on a PC I own. Does this mean I will have to reinstall all the software including Windows? Secondly, I have discovered that a 478 chipset was used on my old ...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t145005-disable_onboard_nicI don't see any way to disable the onboard NIC on the SAMBA 1845. And since I don't have a manual to go with it then I am asking you guys for some assistance. Thanks for your time.Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t72648-vc_11_helpNeed help to solve a unstable system with a frequent reboot problem. Here is the system: VC-11 v1.2, BIOS IEC42, P4 1.5Ghz, 512MB PC133 SDRAM, WD ATA-100 80GB HD, G-Force II 64MB AGP Video, P4 case with 400W PWR Supply, & HP CD/R-RW. ?I've...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t176322-new_motherboard_possible_hal_problemI just upgrade to the new fic au13 board and i can get xp pro to start, all I get is windows last failed to start properly and repeats the whole process over and over. My board detects it the haedr disk in the bios so i don't think that is...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t176317-ka11_problem_need_helpafter installing this board, it hangs after 1st screen (after mentioning hardisks, CD-rom spec)no respond. When press again power button, this process of hang repeats...no c:\prompt or loading of the window?? Is this problem been solved... my...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t176314-problem_promise_ultra66_fic_az11Has any expierenced problems using Promise's Ultra66 controller and the FIC AZ11 mobo? I have flashed the bios on the card and my mobo and I still have lock-ups about every thirty minutes to two hours. When I take the card out everything runs...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166283-amd_xp_1600_ecs_k7s5a_non_starterHi there I purchasred a K7S5A MB and AMD XP 1600 CPU with 128mb PCI 133 RAM. I installed in the ATX case with a 300w power supply and connected my 40GB 7200rpm HDD and CD ROM and also connected my 32MB NVIDIA TNT2 AGP Graphics card. The...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166277-ka_6130_motherboardI am trying to install a USB device on my computer, but whenever I enable the USB controller in the BIOS, the computer freezes up while booting. It will boot fine and show the USB controller in the device manager in Safe Mode. Any ideas what...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t166267-problem_big_60gb_hdd_motherboardHi, I have a motherboard from First International Computer(FIC), model VL-601 and AMIBIOS V1.17. I have bought an IBM Deskstar 60GB HDD to get rid of this irritating 'disk full' msg.. Now I can't use all 60GB! I have to set the harddrive to...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t161364-computer_keeps_rebootingHello, I recently installed a FIC KA-31 Pentium III 1 ghz motherboard with 512 RAM that I purchased from a working computer. I installed it in a case with a 400 watt power supply, PNY video card, 3.5 floppy and CD ROM. I have IDE 80...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t154409-user_manualHi, My daughter has, for some reason, tried to overclock her FR31 and killed it. Also she seems to have lost her user manual. I have tried downloading it from the FIC site to no avail. To get out of it I need to clear the cmos but without a manual...Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t122305-no_dvd_rom_bootConfiguration: P4M-915PD1, 4 bank of 512Mb. 400Mhz, HD maxtor SATA 250Gb., DVD-ROM LG, Intel P4 531 3,00Ghz. 800MHz. I have correctly set in the bios my CDROM such as first start device and when i turn on my system i don't see problem....Thu, 08 Jan 2009 00:01:57 GMThttp://www.fixya.com/support/t72754-vc19_motherboard_standby_mode_problem_inJust setup this pc with FIC VC19 Mainboard, 1GB DDR DIMM, WDC-80GB, Leadtek Geforce4 Ti4600 AGP, Creative SB Live 5.1, Genius 56 PCI Modem, Aopen 16X DVD, BTC 48x16x48 CDRW. After installing WinXP, everything was fine. No problem going into...Thu, 08 Jan 2009 00:01:57 GMT