http://www.fixya.com/support/fargoSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 26 Jul 2008 14:04:04 GMT80http://www.fixya.com/support/t435702-persona_c11WILL THEY BE MAKING A DRIVER THAT WORKS WITH VISTA FOR THE FARGO PERSONA C11 OR IS THERE ALREADY A WAY TO MAKE IT WORK?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t285424-breaking_change_printheadMy DTC525 printer is continuosly breaking the ribbon since I change the printheadSat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t153530-lines_in_pictureWhen using my ID printer, there is a line that goes through the person's picture. Everything else prints fine. I've changed the ribbon so I know that is not the problem.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t668551-printing_problemThe screen says No Mag Encoder, what does that mean?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t136444-printer_ribbon_broke_in_halfToday while producing badges I tried printing an adheive card when the printer ribbon broke in half and the card kept on jamming inside the printer.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t130583-breaking_ribbonHello This is Althaf frm Iraq Iam Having Fargo DTC525 id card printer But Know its Breaking Ribbon Continuesly So i cant able 2 print any card so how can i slove this poblem & there is no Technical support in iraq so how can slove this problem...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t283334-fargo_4250_in_xphas anyone been able to load a 4250 Fargo on their XP machine. I cant seem to find any supported Drivers.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t560952-bad_print_headsIt seems my fargo dtc550 ID card printer print head is giving me a line down the center..they keep saying my print head is going bad...but after 3 months? we are cleaning it everytime we change the ribbon etc...so what could be the problem. note: my...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t603865-white_line_when_printingWhen the card comes out of the printer, it has two white lines on it that deface the picture.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t287013-fargo_pro_l_laminationIm having problems doing laminations and overlays stand alone or after cards are already printed then tweaked. I want to run cards through and im having trouble interfacing properly because im not sure about dwell times and heat for specific...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t198400-white_line_cardI am printing cards and a white line has appeared across the face of the photo. The card looks good on the computer screen and print preview, but a white line comes off on the printing. I changed out the cards and then line was still there.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t111955-ctc_177bh2_osd_shiftedVolume and channel OSD shifted off to the right so that channels are not visible. Closed captioning and customer menues shifted to the left. Tuner shield was done about a year ago and is ok. Problem occured after a power surge that caused C7...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t660358-problem_card_print_using_fargo_dtc525The Ccure access control software we are using to print Fargo DTC 525 printer single side print give error message that the flipper is not installed on printer. Have check with our vendor who supply ccure software and they feedback that is the Fargo...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t297087-fargo_pro_l_using_much_ribbonI am using MS word to print id cards and I am using the ymckok ribbon and the correct setting in the driver for this ribbon.? But when I print the printer will pause and it will advance the ribbon several feet and use a single panel and them advance...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t298247-fargo_pro_l_not_printing_edge_edgeThis printer is designed to print edge to edge on a standard cr-80 pvc card stock. My printer is not printing edge to edge and always prints a yellow background.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t136905-feeders_rolling_backwardsI just started using this printer.. I printed up three or four cards then I noticed that the cards weren't feeding at all. When I opened up the hopper door, to make sure there was card stock, I realized the rollers were moving backwards, pushing the...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t317762-new_ctg_change_problemsI have never changed a ribbon on our new Fargo C30. I have the ctg. which reads: Fargo DTC400 part number 044230 When I place a new ribbon inside the right hand button on the top blinks without a msg. Is this the correct ribbon? Or do you have any...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t223486-wrong_ribbon_messagesI get a message that says "wrong ribbon" after each card is printedSat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t111956-9_motion_771_4mb_xi have a #9 motion 771 with 4MB VRAM. i'm trying to setup X for it, here's the problem. it doesn't autodetect 4 MB.. only detects 2. so i force it to detect 4MB. if i try to run any of the various 16bpp or 32bpp resolutions, i get a weird...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t319314-cardsMy cards are getting stuck in the middle of the rollers.Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t133274-fargo_persona_c16_problem_printingmy fargo persona c16 has problem when printing bar_code it comes out mixed and not clear while the rest of the card is good printedSat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t321208-printing_problem_silver_type_plasticPlease answer me! Why couldn't I printing on silver type plastic. Cards gone/run throw this printer but without printing.After that I've seen "card jam", but inside is'nt card. If I use other type (white or other) cards usualy print this card. I've...Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t321210-fargo_dtc510Please answer me! Why couldn't I printing on silver type plastic. Cards gone/run throw this printer but without printing.After that I've seen "card jam", but inside is'nt card. If I use other type (white or other) cards usualy print this card....Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t428181-fargo_c16_card_printerI have a Fargo C16 persona card printer and I am getting a message on its display stating ribbon error/out. I have tried to replace ribbon with new one. The card print starts but immediately stops. Can you help please?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t271880-fargo_dtc550The printer ribbon keeps breaking. Is there a tension setting?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t121666-mag_verifying_errorI get mag verifying error on all cards. Do i need service. or can i skip the verifying??Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t486258-dtc_525ihave dtc 525 printer .itis doesnot give any response while i give it command from compouter.Can ifind any sloution for this proplem?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t156391-cleaning_print_headHow do I clean the print head on my Persoan M11 printer?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t377739-fargo_pro_lHi there i have a fargo pro L and i cannot download the proper software. Each time i do there is no exe file to install, can anyone offer a solution?Sat, 26 Jul 2008 14:04:04 GMThttp://www.fixya.com/support/t357314-looking_driver_works_windows_xpwhere can i get the right driverSat, 26 Jul 2008 14:04:04 GMT