http://www.fixya.com/support/eureka/vacuumsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 21 Aug 2008 11:30:48 GMT80http://www.fixya.com/support/t199229-picks_up_poorlyWhen vacuuming a carpet it picks up very poorly. When I use the hose it has a powerful suction. The belt and brushes are ok the hoses are clear what can be causing it to pick up so poorlyThu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t269785-brush_roller_stopped_rollingThe roller stopped rolling. At first it was stopping and starting and then it just stopped all together. I took the cover off to make sure the belt did not bust; it was fine. I removed, cleaned, and reinstalled the roller and then it worked for a few...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t267378-hose_attatchment_suckWhen I put the vacuum handle in the upright position, the main vacuum suction does not stop and I cannot use the hose attatchments because when I pull out the hose, dust goes everywhere. HELPThu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t481247-changed_belt_now_vacuum_not_runningI turned the vacuum upside down to change the belt and when I tried the vacuum with the new belt it didn't seem to have the same power that it had before. also the light on the front of the vacuum seemed to be dimming. it seemed like the motor was...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t279224-brush_motor_failureMy Eureka OPtima 426 brush motor failed. When you hit the reset it turns sparks and stops. the electric motor is a sealed motor.DF 651 (2) lg120 Johnson CL.A I.D. 50202500020c. Can I get a replacement or use another replacement part?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t791213-changing_fanI changed the broken fan in my eureka 1934A. Put the cover back on and reattached the belt and when I went to start it, it wouldn't work. I took the cover back off to see what was going on and it looked like the motor was running in reverse of what...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t244679-eeureka_atlantis_2595a_upright_wet_dryWhen I put the water in the canister and put it on the cleaner the water leaks out on the floor.Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t834526-hose_no_suctionMy Eureka 4870 series "The Boss" has no suction on the hose function. ?I have ?cleared the hose and the tubing between the hose and the bag. ?I cannot find what is casing the lack of suction. ?Any suggestions?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t220425-eureka_optimathe dust and lint do not fall into the canister it just styas stuck to the filter makes suction not aas good as it should beThu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t646957-workMy Eureka Mighty Mite 3670 Bagged, was working fine, and we unplugged it to switch to another outlet in another room and it just stopped. We tried several other outlets and it just won't turn on. We thought maybe it got hot because we had been using...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t473649-smells_hotMy Eureka Atlantis has been used for only my home cleaning use and today i went to use it and it is NOT suctioning like it should and it smells very hot and need assistance.Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t396280-eureka_5197_self_propelled_baglessI changed the filters and unclogged it and changed the belt. Suction is fine but it is extremely loud and smells like the belt is burning? How do I fix?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t386737-power_headmotor is good,runs great from test cord switch seems to work. brush roll cleaned but power head motor will not runThu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t369105-low_suction_eureka_whirlwind_4481Low suction. How do I open it to check the tubes for debris? Can i order a manual?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t363833-taking_bag_holder_offIs there a way to take the bag holder off to wash it? It really stinks!!Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t461536-eureka_whirlwinde_litespeed_vacuum_modelI bought a new belt for this vacuum, but cannot find the owners manual to figure out how to change it.Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t394706-trouble_shampooerWHEN I START THE SHAMPOOER UP IT MAKES A ROARING SOUND AND ALSO, I SMELL RUBBER? WHAT COULD THIS PROBLEM BE?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t415086-bagsMOD-MD05 PRO-NO 900386 SER-NO 98320337Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t415976-belt_brokeI need to find out how to get in the vacuum to replace the belt but cannot figure it out. I do not have the owners manual for this Eurka The Boss Superlit bagless (402a) please e-mail me any directions if you know how to do it,thanks....Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t401081-eureka_capture_vacuumThe canister isn't filling with carpet waste material, instead the hose on the back is getting clogged with the debris. How do I shut on the airflow to the hose while I am using the vacuum upright in order to collect dirt in the canister?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t409863-bestwhich vacuum is the best when you have pets?(dog and cat)Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t258791-steamer_410_cord_problemthe ele cord only works when you move the cord around at the unit and you have special star with pin screws so we can't check the wires ,I work at lowes and have sold this 410 steamer to my wife and she loves it ,she uses it on all our floor tiles...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t273871-eureka_whirl_wind_electornic_baglessThe red light is on what does that meanThu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t226885-just_workI am sure hopeing you have a solution!! my cannister was 1/4 full, but the bag is really heavy with dog dander, and yes... dust from the ceiling I scraped last ewek of it's "popcorn" finish. I was hoping I could remove the bag , but coulddn't feel...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t318201-change_belt_eureka_whirlwindMy Eureka Whirlwind 4381 has no suction from the roller on the bottom. The hose has great suction. I am trying to figure out how to change the belt. Any ideas?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t249665-changing_belthow do you remove the base to change the beltThu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t256316-hose_problemThe hose broke just above the cuff on the inlet end of the hose.? I found that the hose doesn't thread into this cuff but appears to be heat bonded in some way. Can I get a replacement cuff or do I have to replace the hose?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t361178-no_suction_rollerWhen the switch is positioned on "floor", there is suction. When the switch is positioned on "carpet", there's no suction but the roller brush turns. Shouldn't I have both brushroll action and suction at the same time?Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t214388-power_surge_issueAfter the Eureka 4467 runs for a few minutes a power surge occurs. The vacuum motor slows down and any lights in the house are dimmed. Is there a fuse or something that I can change? The suction seems okay, and nothing is clogged. Thanks...Thu, 21 Aug 2008 11:30:48 GMThttp://www.fixya.com/support/t290727-pick_upMy vacuum will pick up in the front but it comes out the back? Any ideaThu, 21 Aug 2008 11:30:48 GMT