http://www.fixya.com/support/dcsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 12 Oct 2008 20:52:46 GMT80http://www.fixya.com/support/t457105-replacing_dcs_oven_knobsHello. I replaced the 5 circuit re-igniter on my DCS range recently and it was as easy as replacing a distributor cap (does anybody remember distributor caps?). Ironically, the issue I'm having is putting the knobs back on. They are press fit and...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1099234-display_our_dcs_oven_beginning_fade_fixthe display is beginning to fade on our dcs oven. can it be fixed by owner or does it need to be serviced?Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1086043-dcs_double_wall_oven_model_wosd_230ovens shut down during self clean. totally dead. wont recover. door remains lockedSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1070408-low_flameWhen i light the grill the flame is very low and takes awhile for the temp to rise.Their is plenty propane in the tankSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1052318-need_replace_melted_carousel_couplingI ordered a new replacement coupling for my microwave thinking that I could figure out how to get the old one out and put the new one in by simply looking at it. Well, no such luck. I can't figure out how to get the old one out, much less how to...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1038604-broiler_not_working_oven_okI have a DCS RGS-305SS 30" Gas range which has had numerous failures (thermostat broke, it shipped from factory with the oven disconnected etc). Been working fine for a few years now but recently after a power outage, the broiler stopped working....Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1007658-burners_ignite_simultaneously_clickingWhen I try to lite one burned all 6 burners try to ignite and I cannot stop them all from clicking. I have unplugged the cooktop and now light the gas manually. Please help Cecil mcboldt@comcast.netSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t941181-dcs_range_ignition_problemI have a DCS RGS Series Range which I bought 2 years ago. Two days I started to have this ignition problem. When I turned on the a burner (there are 4), the ignition won't stop and keep clicking even the burner already started. Actually, all 4...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t866579-side_burner_jennaire_grillWorks well but produces soot on pans, etc. Not sure if the flame is uneven since the sooting occurs on just one area. How do I remedy this?Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t865489-thermostat_issue_dcs_fryerUpon lighting the pilot light and turning the knob to the on position the gas burners automatically ignite. This happens without turning the thermostat control knob to any temp setting. Please help River Cat's Fish FrySun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t824373-igniter_will_not_shut_off_dcs_rgs_366when I ignite any burner the igniter continues to click away after the burner is ignited. How do i correct this?Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t661597-burner_dials_turnThe grill is built-in. Dials won't turn to light grillSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t609573-whirlpool_gas_cook_topthe electric starter keeps clicking when it is turned offSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t579006-fryer_promblemsit dont do it all the time but you can hear the thermostat click to cut gas off when reached temp but sometimes it wont cut gas off all the way it seems like the gas is half on.Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t477952-ve_lost_switch_dcs_patio_heaterWhere can I buy a replacement?Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t354491-stove_beepsI have this beeping noise in my kitchen that is driving me nuts. I have finally realized that it's coming from my stove (dual fuel DCS) It's a faint beep and it seems to be coming from under the stoveSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t317788-ignitors_continue_fire_even_after_burnerthis has bee going on for several days; how can i get it to stop, it apparently doesn't recognize when the flame is lit; i've tried letting them click for a while, doesn't stop after 20 minutes...how to stop? am i doing any harm by letting them...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t316534-dcs_gas_oven_lockedI accidentally engaged the oven lock mechanism that is usually used for self-cleaning. The door locked. I turned everything off 12 hours ago. The oven door is still locked. Please, help.Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t82333-range_ventilation_questionAm building and need alittle advice on the range hood. ?The range top is being installed against a wall. ?On the other side of the wall is the garage. ?On the 2d floor above the range is a hallway. ?The ductwork will be 10". ?Here is the...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t112003-ventilation_really_necessaryHi all, We have a 48-inch DCS slide in range with a 48 inch Viking hood. We've owned them for 7 years and are now doing some remodeling. We are raising the ceiling and making the cooking area an "island"???we will no longer use the overhead...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t116214-f7_alarmMy oven occasionally will ding loudly, and the screen will portray the message 'F7'. Pressing buttons is innefective, and the beeping goes on interminably. My only solution is turning off the breaker for the oven. any clues? tips? solutions?Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t136971-built_in_double_oven_display_fadingDigital display on front panel - lights are dim to unreadable. We have no idea how to proceed, but need to do so that we can read the temperature of the oven. Thanks, JamiSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t159087-ewave_otr_microwaveI had cooked in the microwave for 30 minutes and then the fan came on all by it self. I could not turn it off. After an hour or so we tried to unplug it to maybe reset it but it still did not turn off. I have cooked for 30 min or longer before and...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t235266-microwave_door_open_when_push_buttonI have to push the button many times before the door will open. The door seems to "give" when I push the button, but there isn't enough "thrust" to open the door. Eventually the door opens after pushing and pushing the button, but this problem...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t281055-ignitors_keep_firing_themselves_afterIgnitors keep firing by themselves after my aunt cleaned them 24 hours ago After she did the major cleaning of the stove I used the oven and it worked fine. I lit a burner (Probably front?) and the left rear burner went pop and then all the ignitors...Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t301393-ewave_over_range_microwaveWhen the microwave is turned on it hums,The interior light does not go on and the turn table does not spin. Everything else on the microwave works - lights / fan ect.Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t372452-broiler_wont_comeMY BROILER WONT COME ON EVEN THOUGH THE OVEN WILL HEAT UPSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t751963-dim_lcds_dcs_double_wall_ovenI have a DCS 27 inch double wall oven. The LCD's that indicate the oven temperature (the red LCD's) have gone dim so that they're barely visible. Everything else works including the LCD's for the clock (the blue LCD's).Sun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t794632-dcs_elect_wall_oven_lcd_displayoven works fine just can't see the temp display- very faintSun, 12 Oct 2008 20:52:46 GMThttp://www.fixya.com/support/t1029543-gas_stove_dcsi just purchased house with gas stove (dcs) it takes to long to start, few seconds to long, and the minimum is still to high to cook something slowly (sauces etc.) can this be fixed, serviced change parts or i need a new stove? No money for that...Sun, 12 Oct 2008 20:52:46 GMT