<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title>Dacor Technical Support</title><link>http://www.fixya.com/support/dacor</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate><ttl>80</ttl><item><title>my dacor takes 1 hour to heat to 500, in all modes.</title><link>http://www.fixya.com/support/t2347467-dacor_takes_1_hour_heat_500_in_all</link><description>The problem just started out of the blue. All modes heat, but take long  time to reach even the lowest temperatures. Sometimes over an hour to reach 500.  The problem thought does not happen all the time, it is getting more frequent.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Dacor CPO230, can't get lock to engage for self</title><link>http://www.fixya.com/support/t2194372-dacor_cpo230_get_lock_engage_self</link><description>Dacor CPO230, can't get lock to engage for self cleaning. I follow step clean symbolcomes up door lock moves into locked position then beeping starts and the word door flashes and the lock opens up.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Dacor oven light bulb</title><link>http://www.fixya.com/support/t2014844-dacor_oven_light_bulb</link><description>My Dacor range light bulb went out. Dacor charges upwards of $60 for a replacement bulb. Can anyone recommend a not so expensive bulb? I used an OSRAM light bulb before but it was rated not to exceed 500 degrees F. Can't use it for self-cleaning...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Whirlpool Cooktop igniters keep firing, even after igniting</title><link>http://www.fixya.com/support/t1886288-whirlpool_cooktop_igniters_keep_firing</link><description>My Whirlpool cooktop igniters won't stop firing, even when I turn on the gas and there is a flame. In order to get then to stop firing, I have to unplug the cooktop. As soon as I plug the cooktop again. the igniters keep firing. The only way ti stop...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>took off trim around lightbulb</title><link>http://www.fixya.com/support/t1808878-took_off_trim_around_lightbulb</link><description>Okay I didn't know how to get the light globe out of my Dacor hood, so I just turned the trim piece until the springs let go. Now I have no idea how the springs were loaded in the trim and then into the hood. I have had them lying on my counter for...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>dacor rsd305</title><link>http://www.fixya.com/support/t1769630-dacor_rsd305</link><description>Hello Experts, I did an oven clean with my Dacor and now it won't heat up again. I press bake and set the temp for 350 or so. The display starts at 135 and stays there. No heat. It reads 135 pre heat. I turned the breaker on and off with no change....</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>stove top in lock mode</title><link>http://www.fixya.com/support/t1680375-stove_top_in_lock_mode</link><description>There is a red light on in the bottom right corner. None of the burners will turn on. I figure maybe its in some kind of lock mode. Please tell me how to fix it. Thank you.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>My Dacor ER36D wont heat after self-cleaning.  What should I do?</title><link>http://www.fixya.com/support/t1670223-dacor_er36d_wont_heat_after_self</link><description>Set up the self-cleaning this afternoon. Went to cook dinner and the oven will not heat at any setting.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Display panel is scrambled on my Dacor DMT2420 microwave.</title><link>http://www.fixya.com/support/t1596350-display_panel_scrambled_dacor_dmt2420</link><description>All functions continue to work including the display panel, however the display is scrambled and hard to read. How do I unscramble the display? Thanks</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>M/w only working when slight pressure applied to door button</title><link>http://www.fixya.com/support/t1480365-m_w_only_working_when_slight_pressure</link><description>This morning, our Dacor m/w oven stopped working - panel was still on and counting down seconds as normal, but no m/w sound or platform turning. After tinkering with it, I realized that the m/w sound and platform returned to normal when I apply a...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Raised vent is Rising after being lowered</title><link>http://www.fixya.com/support/t1350623-raised_vent_rising_after_being_lowered</link><description>Raised Vent is Rising My dacor pinnacle raised vent system will lower but comes back up. What can i do? (model Rv30/rv36/rv46)</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>oven failure code F0</title><link>http://www.fixya.com/support/t1195166-oven_failure_code_f0</link><description>Touch pad is stuck in depressed position. Is there an easy fix?</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>dacor single oven flashes an F2 error code and won't stop beeping!!!</title><link>http://www.fixya.com/support/t1173649-dacor_single_oven_flashes_f2_error_code</link><description>My Dacor single oven flashes an F2 error code and won't stop beeping.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Dacor DCM24 - Security screw/tamper proof hex bit size?</title><link>http://www.fixya.com/support/t1068776-dacor_dcm24_security_screw_tamper_proof</link><description>My Dacor DCM Microwave/convection does not turn or heat altough the fan runs and panel seems to work. I was removing the screws on the back in order to lift off the top/sides but can't find a tamper proof bit that fits the Dacor tamper proof screws....</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Dacor coffee maker</title><link>http://www.fixya.com/support/t902208-dacor_coffee_maker</link><description>Hi, I see you have a Dacor coffee maker. I had one installed about 8 months ago (CM24P) and I haven't been too happy. I've had a number of problems and the user interface is very confusing, but my biggest issue is that the strength of the coffee...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Dacor error codes</title><link>http://www.fixya.com/support/t544036-dacor_error_codes</link><description>My Dacor single wall oven won't stop beeping... error codes F1 and F5 keepflashing.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>dacor oven ECPS127S will not heat after self clean</title><link>http://www.fixya.com/support/t398950-dacor_oven_ecps127s_will_not_heat_after</link><description>the oven went into self clean mode for 2 hours&gt; it worked flawlessly. after the self cleaning mode and cool down, the oven will not work. Broil convection bake will not work in any mode. the time works. the touch panel works. i shut it off at the...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>error code</title><link>http://www.fixya.com/support/t373486-error_code</link><description>f4 is the error code i am getting...can't find out what this indicates.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>bottom oven of dacor double oven</title><link>http://www.fixya.com/support/t313985-bottom_oven_dacor_double_oven</link><description>Bottom oven won't heat.? Power seems fine. Top oven is working fine. Bottom oven goes to preheat but doesn't heat.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>dacor downdraft vent</title><link>http://www.fixya.com/support/t281756-dacor_downdraft_vent</link><description>remodeling kitchencan I change top piece from white to stainless steel?</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Clock will run down to 1 second of the minute and microwave will stop</title><link>http://www.fixya.com/support/t204245-clock_will_run_down_1_second_minute</link><description>Our Dacor PCOR30 over stove microwave stops when there is 1 second left to go on a minute. Set at 3 minutes it runs to 2 minutes, 1 second and stops, push start again and it runs to 1 minute 2 seconds and stops. We recently had a construction company...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Help - Need - Expert - Tech - Wizard (insider) ... To Reset Dacor Wall Oven</title><link>http://www.fixya.com/support/t171517-help_need_expert_tech_wizard_insider</link><description>The above data is a cut-and-paste snip taken from an old post.

I also have an older Dacor oven (the Millennia model MCS230). Last
 night we were broiling with the door open (to make sure the cooking
 process didn't get away from us). We soon...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Display reads U60 Cooling Fan - oven won't heat</title><link>http://www.fixya.com/support/t133008-display_reads_u60_cooling_fan_oven_heat</link><description>The display reads "U60 Cooling Fan" and the oven won't heat up.  I can scroll through all the menus, but it won't DO anything.  I can't find anything to tell me what that code means.  The oven is only six months old -- please help! Thanks.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>DACOR DOWNDRAFT RV36B PROBLEM</title><link>http://www.fixya.com/support/t128975-dacor_downdraft_rv36b_problem</link><description>the vent is stuck in the up position an the lights are all on it will not reset.  After a while 2 lights go off leaving only the hi and low lights lit.  

Tried killing the power no change.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>PROBLEMS WITH FR ERROR MESSAGE APPEARING</title><link>http://www.fixya.com/support/t126906-problems_fr_error_message_appearing</link><description>I HAVE HAD THE THERMOSTAT REPLACED 2 TIMES IN THE LAST 2 MONTHS.  MY PROBLEMS STARTED WITH THE TOP OVEN SHOWING AN F4 MESSAGE DURING PREHEAT FOLLOWED DIRECTLY BY THE BOTTOM OVEN SHOWING F4.  BOTH OVENS STOPPED WORKING.  I HAVE TRIED RESETTING THE...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Possessed Oven</title><link>http://www.fixya.com/support/t121451-possessed_oven</link><description>This Dacor oven is not my main oven and has only been used 5 or 6 times since it was installed 2? years.  Almost from the beginning I noticed that the oven light would come on for no apparent reason. I would turn it off, and it would be fine for a...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>Dacor sgm304s, Ignitor constantly snapping.</title><link>http://www.fixya.com/support/t2903026-dacor_sgm304s_ignitor_constantly</link><description>When I just installed the unit after relocating it from one house to the current house installation. The ignitor sparks while the gas knobbs are shut off and only stops when all 4 or 3 specific burners are on (doesn't matter if burner is low or...</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>clips on DACOR PURSUIT DL MASK are broken -want to replace them</title><link>http://www.fixya.com/support/t2393842-clips_dacor_pursuit_dl_mask_broken_want</link><description>I have prescription lenses and want to replace clips to keep using this great mask! Looks like ebay is the only place to get DACOR parts anymore - anyone else know where to get DACOR Mask parts?</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>SGM464EM  cook top valve rplacement</title><link>http://www.fixya.com/support/t1364724-sgm464em_cook_top_valve_rplacement</link><description>I need to replace the 4 gas valves of a  SGM 464 EM Dacor cook top. I don't know if  to gain access to the inside of the top I would need to dismount the four  burner bases or can I gain access from the bottom.</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item><item><title>dacor preference oven</title><link>http://www.fixya.com/support/t1095713-dacor_preference_oven</link><description>My dacor preference PCS130B electric oven will not turn on. I have done all the trouble shooting procedures sugested in the manual. Now what?</description><pubDate>Tue, 15 Dec 2009 08:40:48 GMT</pubDate></item></channel></rss>