http://www.fixya.com/support/compaq/serversSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 20 Jul 2008 10:55:25 GMT80http://www.fixya.com/support/t133139-no_displayDS10 running OpenVMS 7.3, it was powered down 3 months ago. On power up no display, no consol output on the serial port. Any ideas would be appreciated?Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t612463-run_compaq_array_configuration_utilityI bought one of these servers second hand to do some of my assignments on. I installed windows server 2003 and then the array configuration untility for windows. The server has 5 9.1Gb drives in. I then tried to make a raid 0 with 2 disks and a raid...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t255191-102_errorsystem timer errorSun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t223283-compaq_dl380_will_not_bootServer starts booting and stops. Turns off and re-start again.. WWill not boot but goes on and off...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t155157-chnge_battery_compaq_dl580Hey i need a document on how to change the battery for compaq dl580Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t30406-mm_createpartition_failed_code_526This error happens every time I try to do the frsh install of SBS on this machine. ?It;s never had SBS on it before. ?I'm doing the express installl, not the custom. ?It is in the "Netware Installation" portion (shortly after identifying...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t113721-remote_netware_manager_proliant_ml370_g4I have run into a very strange phenomenon with a new HP ml370 G4 running SP2. When I start the Remote manager and click on the "volumes" link it takes about 20 seconds to build that page. The processor is running at about 57% during the 20...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t113710-upgrading_ramI bought an upgradeable Compaq Presario 5310US 3 years ago with 40 GB HD and 256 MB RAM. Now I want to upgrade to 512 MB RAM. I have read all the documentation but I still don't understand if I am supposed to replace the 256 MB module that I...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t30417-issue_ejecting_tapes_compaq_ml330_370Hi, Have recently been loading OSR5.0.6(a) on some of the nice Compaq Prolient ML series of servers, using the Compaq re-badged DDS3/4 tape drives (STD-9000/10000). When issuing the 'tape unload /dev/rStp0' command (or xStp0 or...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t30357-hardware_problem_installing_4_5_compaqI'm having trouble installing 4.5-RELEASE from the CD's on a brand new Compaq DL380 G2 (the new 2U unit). As I understand it the Raid Controller is Compaq SmartRaid 5i (it says so on the screen:), but this controller is not detected during...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t194814-problems_bootingI had a problem with harddisk.System was working and it stoped working some days ago.I took server and after looking on problem I saw that it was not able to aknowledge harddisk and at the same time it was not booting from it.I changed harddisk with...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t654302-need_bootable_floppy_program_compaqhi! i need the floppy disks to boot to dos or into the bios i cant get it to boot off the cd rom at all.Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t384275-wont_boot_power_light_flashing_orangeThe system wont boot. it powers on CD light flashes and disks whirr but screen stays blank No flash screen or Bios screen. The Disk light is hard on and the Power light is green but also flashing orange(yellow). Dies this point to any particular...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t155166-ml580_batteryML580...BATTERYSun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t203827-ds10_problemsDs10 was working and at once it stoped.I took it and I looked what could cause the problem.It seemed tah the problem was coming from HDD and I changed it.But after I chenged and started to install TrueUnix64 It stoped installation havind a diagnose...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t186465-fan_problem_wont_bootI've got an old ML530 that thinks the fans have gone. fans 1 & 3 are working, with green lights on. there are 2 empty bays, but the case says three are 6 in all.. cannot find them !!! i need to get to the C drive, but it keeps looping and...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t401938-alpha_server_ds10_open_vms_7_3The server is not booting up. Currently when we start up: 1. it beeps 6 times. 2. the hard drive light remains on. 3. the fan light remains on. 3. it cuts off on its own. Initially only #1 above was occurring. Then #1 and #2 started occurring. Then...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t403340-booting_from_cdromI installed scounixware 7.1.1 on above server. It keeps on rebuilding kernel ... for ever. To overcome the problem, I wish to reinstall from CD. However, I am not able to do fresh installation from CDROM. Instead of starting fresh installation from...Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t464339-ml530I have an old Compaq Ml530 Server and dont have a scsi hard disk i want to know when i install a ide harddisk it does not detect the diskSun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t508912-open_vms_7_31. Can anyone tell me where I can get the operating system OPENVMS 7.3 to purchase or download. 2. What are the hardware requirements for that Operating systemSun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t508921-openvms_7_3Can anyone help me with the following, Please: 1.WhereI can get the Operating system OpenVMS 7.3 to purchase or download? 2. What are the hardware requirements for that Operating system? Thanks in advance NarvaarSun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t662876-changed_mother_boardchanged the mother board so MAC address has been changed comunication is not established now, how to insert the new MAC address in server, currently it is not communicationg with PLC Please help me,Sun, 20 Jul 2008 10:55:25 GMThttp://www.fixya.com/support/t662894-changed_mother_board_mac_address_changedchanged the mother board so MAC address has been changed comunication is not established now, how to insert the new MAC address in server, currently it is not communicationg with PLC Please help me,Sun, 20 Jul 2008 10:55:25 GMT