http://www.fixya.com/support/browse/kitchen_hoodsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 05 Dec 2009 08:16:23 GMT80http://www.fixya.com/support/t2952539-need_diagram_connect_wiringi need a diagram for how to connect the wiring parts for a commercial exhaust hood the hoods mark are LARKIN mark and the other one is CAPTIVEAIRE 1 of the hoods is 4 ft and the other 1 is 8 ftSat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t2880110-size_exhaust_pipe_needed_downdraftI am installing the cooktop with a telescoping downdraft on an island in the kitchen. I need to run the exhaust pipe BEFORE I install flooring and the cabinets. What size pipe do I need to run? The other thing, I am installing at 2 x 4 pony wall,...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t2706717-changing_bulb_in_zephyr_venezia_hoodI was changing a bulb in a Zephyr Venezia hood. As I changed it, there was the sound of something blowing (fuse maybe). All the lights still work, but now they won't turn off. Is it a fuse or a control panel issue? And can these be replaced?Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t2526464-tradewind_range_hood_model_psl736_bothWe have a Tradewind range hood- model PSL 736. The 2 halogen 50W lightbulbs stopped working at the same time during a thunderstorm...our house was not hit (incase you are thinking that). I have purchased 2 new light bulbs, but the lights are not...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t2514788-jenn_air_range_hood_jxt8136adsTHE JENN AIR RANGE HOOD FAN  JXT8136ADS MAKES A RUBBING SOUND Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1937936-lost_power_all_featuresThe power is still on because the green light can still be shifted from one end to the other. I'm told the probleme could be the control panel and the pert # is R111663. I live in St-Lambert Qu?bec. Where can I get this part?Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1831847-kitchenaid_hood_wont_allow_reset_cMy kitchenaid range hood displays "C" when the filters need cleaning, after 100 hours. Mine is displaying "C", I cleaned the filters and pressed the "H" button for 4 seconds to reset the counter and I still have the "C". Have even tried turning off...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1808878-took_off_trim_around_lightbulbOkay I didn't know how to get the light globe out of my Dacor hood, so I just turned the trim piece until the springs let go. Now I have no idea how the springs were loaded in the trim and then into the hood. I have had them lying on my counter for...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1790923-want_use_without_outside_ventnever hooked up but would like to use it without venting to the outside- needs major cleaning. can't find original instructions.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1699565-hood_fan_works_but_displays_letter_cAnd how do I clear it ?Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1660411-install_chimney_coverWe don't know how to install a chimney coverSat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1620680-clean_blower_wheel_housingCan I remove the clevis pin holding the blade assembly so I can remove the blades for cleaning. I have tried to do it while it's still in place and there is no way to do a proper job.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1513486-microwave_above_stoveWhat is the recomended code or clearence of space from a cooking surface to the bottom and top of a microwave? Is there a code that should be followed?Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1471199-8_yr_old_whirlpool_microwave_will_turnnot heat anything.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1380314-thermador_wall_hood_model_hs36The filter light is on. Cleaned all three filters. Still on. Can't find the original manual now. What is the next? Thanks.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1351724-replacement_filterI need to know where to buy a replacement filter for model VCH8 - the one I have is wing shaped and mesh. Any suggestions on where I would find one?Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1350623-raised_vent_rising_after_being_loweredRaised Vent is Rising My dacor pinnacle raised vent system will lower but comes back up. What can i do? (model Rv30/rv36/rv46)Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1284050-installing_new_hood_vent_re_circulatingCAN I SPLICE AN EXT CORD AND ATTATCH IT TO THE WIRES IN THE HOOD AND PLUG IN WALL SOCET BEHIND STOVE, WHICH IS 120V, HICH IS POS AND WHICH IS NEG ON THE EXT CORD.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1283028-kitchen_extractor_fan_just_startedkitchen extractor fan just started making a screeching sound and slows down and stops as if something is holding it back Not sure whats happeningSat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1254633-baumatic_cooker_hood_lights_not_workingbaumatic cooker hood isl94.1, crackling noise then pop, bulbs no longer work but extractor still does. Investigated switch panel circuitry and found that the circuit bulb / lights on indicator light has blown. We think we simply need to solder a new...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1116369-jenn_air_downdraft_ducting_roof_rack_wI am looking for a high quality roof mounted termination vent cap for 8" O.D. round ducting for my Jenn-Air downdraft Stove Top/Convection oven. The reason for the 8" ducting is that I am using insulated stove piping out of the wall of the house into...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1065956-zephyr_milano_hood_fan_lights_stopAfter the power went out this morning our Zephyr hood lights and fan don't work at all. There is a faint glow on the digital display but the fan and lights don't respond to pressing the control buttons.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t1021428-ws3_broan_allure_range_hood_premier_36This hood worked fine until a light bulb blew out. Put in a new light bulb, but the lights will not turn off. Is the light switch bad or is there a problem with the control panel? The fan still works fine but the lights will not turn off or adjust...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t794972-broken_light_switch_nutoneI have a Whispaiare WA6500 range hood with a broken light switch (part R561138)...anybody know which wire goes where on the new switch? A wiring diagram is what I need. There are 4 places on the switch (labeled) and only 3 wires. ThanksSat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t712724-damper_need_broan_range_hoodI am venting the hood starting with 7" round ducting and converting to 31/4 x 10" rectangular. I have to start vertically and then turn 90 degrees to wall vent. Directions for a 7" round ducted discharge say to install 7" round damper,(not included...Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t637612-zephyr_typhoon_ak2100_kitchen_range_hoodThis is a 6 speed Range hood. all 6 speeds were working before, but now all of a sudden, only TOP speed (number 6) works, FAN does not work at any other speed (1 to 5). Halogen lights are working at all speeds. any suggestions will be welcome.Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t633510-viking_downdraft_dipr_160r_cableI need a new cable as one pins were broken off during installation Thanks a million. AndySat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t507076-smeg_p580_range_hoodSmeg P580 Range hood will not switch off, fan goes from 1>4 but not 0 > 4 ?Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t478682-smell_neighbours_cooking_comes_hood_fanWe live in a semi-detached home and we often smell our neighbours cooking come through our hood fan. We have taped the flu and have not used our fan and we still smell their cooking. Our damper is not stuck. Could you please help us!Sat, 05 Dec 2009 08:16:23 GMThttp://www.fixya.com/support/t456411-neff_extractor_fan_not_workingHi - I have a neff extractor fan which hasstopped working. The light and fan have both stopped working. Do youknow where I can find the fuse as I suspect that this may be the problem. If you/ don't think it is the fuse would you be able to suggest...Sat, 05 Dec 2009 08:16:23 GMT