<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title> Dishwashers Technical Support</title><link>http://www.fixya.com/support/browse/dishwashers</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Wed, 09 Jul 2008 09:54:31 GMT</pubDate><ttl>80</ttl><item><title>wash cycle</title><link>http://www.fixya.com/support/t115373-wash_cycle</link><description>Washer fills and drains ok.  Wash cycle only- I hear motor hum but no water moves in the washer.  Dishes don't get wet and no spray that I can see.  Water level is above filter screen.</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>GE Nautilus - top spinner has fallen off</title><link>http://www.fixya.com/support/t228011-ge_nautilus_top_spinner_fallen_off</link><description>The spinning water thing on the top has come off and I can seem to get it reattached to where it stays on.   Any suggestions?  Am i missing a part?</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>DISHWASHER IS LEAKING A LOT OF WATER</title><link>http://www.fixya.com/support/t114617-dishwasher_leaking_lot_water</link><description>I have had my Hotpoint dishwasher for 18 months and only use a couple of times a week.

Yesterday, in mid cycle water started pouring out of the bottom of the dishwasher (front, right side). I pulled out the dishwasher thinking that a hose may be...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>fisher and paykel DD-603 dish drawer</title><link>http://www.fixya.com/support/t103415-fisher_paykel_dd_603_dish_drawer</link><description>My dishwasher has flooded from a blocked drain filter. 

The flood switch has tripped and is showing "F1 with spanner" on the display. 

The pump is constantly running on both drawers.

I am hoping someone can tell me how to reset...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>whirlpool gu2400xtpt3</title><link>http://www.fixya.com/support/t103644-whirlpool_gu2400xtpt3</link><description>Green light flashes, doesn't run, how can I repair this myself?</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>DISASTER! PLEASE HELP.  WOKE UP THIS MORNING &amp; DISHWASHER MELTED!!!</title><link>http://www.fixya.com/support/t152879-disaster_please_help_woke_up_morning</link><description>THANKS SO MUCH FOR READING THIS POST.  I RARELY USE THE DISHWASHER. MAKE THE LONG STORY SHORT, WOKE UP THIS MORNING AND WE FOUND A COUPLE OF ITEMS IN THE DISHWASHER- MELTED. INCLUDING THE BOTTOM/ LOWER "PROPELLER" LIKE ARM THAT SPINS TO DISPENSE...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Shutdown of DW very near end of drying cycle</title><link>http://www.fixya.com/support/t126573-shutdown_dw_very_near_end_drying_cycle</link><description>Very near the end of the drying cycle, the DW appears to have tripped a circuit breaker (not Earth leakage trip).  After untripping the breaker, the DW does not indicate any power to the device and so no longer operates.

Is there a fuse on these...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>"3 second" light flashing</title><link>http://www.fixya.com/support/t143929-3_second_light_flashing</link><description>Electronic panel has a "3 second" button that is flashing. We tried turning off power but it still flashes when powered up. The dishwasher will not start. None of the other buttons will work.</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>BOSCH DISHWASHER  SGS46E226</title><link>http://www.fixya.com/support/t190883-bosch_dishwasher_sgs46e226</link><description>THE ABOVE IS BRAND NEW . PLUMBED IT IN. CAN'T OPEN THE MACHINE TO GET PAPER WORK OUT.  NOT TAKING IN WATER.  CAN YOU ADVISE.  IS THERE A TIME DELAY?  AM VERY PUZZLED</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Stuck on agent</title><link>http://www.fixya.com/support/t114594-stuck_agent</link><description>My Bosch SHU43C dishwasher is doing something but not its regular process &amp; the front panel agent indicator lamp is on.
I tried to reboot the machine by  de-energizing but with the same result.</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>kenmore elite dishwasher</title><link>http://www.fixya.com/support/t273954-kenmore_elite_dishwasher</link><description>dishwasher won't stop blinking (clean lite) i can't do anything</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>lds 5811ww dishwasher e1</title><link>http://www.fixya.com/support/t238089-lds_5811ww_dishwasher_e1</link><description>I have the e1 error and the local repairman can not repair it. They have tried a new motherboard to no avail and have stated the problem is with the power getting to the unit. It is not 120 volt. They are wrong. I think I am on my own with this...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>cant get delay to turn off</title><link>http://www.fixya.com/support/t200615-get_delay_turn_off</link><description>anyone know how to turn off the delay?</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>turning on dishwasher</title><link>http://www.fixya.com/support/t154037-turning_dishwasher</link><description>As I went to turn on my dishwasher, I notice that the clean button stay on. Normally I would just press the cancel button and everything goes back to normal . But this time I can't remove this clean flashing light.So this mean I can' t even start a...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Smeg DF612S</title><link>http://www.fixya.com/support/t248191-smeg_df612s</link><description>All starts well but after 40 minutes stops with a beep and will not progress to the main wash cycle. Instead all programme lights come on (located on the left), along with the first 2 phase lights (the first two of the lights on the right hand...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Dishwasher not resetting before new cycle</title><link>http://www.fixya.com/support/t102591-dishwasher_not_resetting_before_new</link><description>Model: Indesit D41
Before starting a new cycle you first need to select reset on the dial. When doing this, the drainage pump operates for about a minute followed by the pre-wash light blinking indefinitely and I cannot get a washing cycle to start....</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>tricity bendix keeps turning off !!</title><link>http://www.fixya.com/support/t144160-tricity_bendix_keeps_turning_off</link><description>can someone please help? my dw keeps turning off, it will run ok for about 20 mins then turns off !! i tryed using an extension lead but it still happened, anyone got any ideas?
thanks

Lynne</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Hotpoint Ultima dishwasher DF32</title><link>http://www.fixya.com/support/t131860-hotpoint_ultima_dishwasher_df32</link><description>The machine has started filling with water while standing idle. Any suggestions?</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>U2 fault code?</title><link>http://www.fixya.com/support/t116812-u2_fault_code</link><description>I have got a U2 fault code on my top dishdrawer.I think it means the door is open when trying to wash.I push the power button to clear the code and close the drawer again but the fault keeps appearing when trying to do a wash.What next?</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>failure to drain</title><link>http://www.fixya.com/support/t121660-failure_drain</link><description>The machine has stopped draining - through each cycle it re-ses the same water (well the level in the machine doesn't rise - but no water his released through the drain hose!)

If I manually remove water from the machine - it takes on more!

I...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>jet dry not draining no clog as far as i know</title><link>http://www.fixya.com/support/t125594-jet_dry_not_draining_no_clog_as_far_as</link><description>my jet clean/quiet pack will not drain after cycle is done, is the dial junk?can it be replaced someone mentioned it was the dial/relay</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Dishwasher has lights but won't do anything</title><link>http://www.fixya.com/support/t124908-dishwasher_lights_but_anything</link><description>I changed my disposal recently.  I am not sure if washer has worked correctly since then.
Brand new whirlpool DU1048 built in with electronic buttons.

Right now, dishwasher has water up to bottom of door and won't drain or resume.  Dishwasher...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Jenn-Air dishwasher jdb1100aws problem</title><link>http://www.fixya.com/support/t429272-jenn_air_dishwasher_jdb1100aws_problem</link><description>I have a Jenn-Air dishwasher, model JDB1100AWS. It's not working properly... when I start a wash cycle, hot water pools in the bottom, but the dishes don't get sprayed, and within a few minutes the dishwasher shuts itself off. At this point I can set...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Dishwasher starts then stops</title><link>http://www.fixya.com/support/t153774-dishwasher_starts_stops</link><description>After pressing the normal cycle button, then the start button, the dishwasher begins to run (no water enters tub), then the water heating light comes on for approximately 2 seconds then goes out followed by the dishwasher shutting itself off. The...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>leaky door</title><link>http://www.fixya.com/support/t246288-leaky_door</link><description>have a hobart model numbe LX3011 door is leaking on the bottom</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>bosch 5315 dishwasher</title><link>http://www.fixya.com/support/t101714-bosch_5315_dishwasher</link><description>I opened the dish washer while it was running to add a dish.  When I shut the door, it does not run any more.  Yes it does have power at to the unit. please help!!!!</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>GE PRofile Diswasher PDW9880</title><link>http://www.fixya.com/support/t143014-ge_profile_diswasher_pdw9880</link><description>will not accept change to setting.  Remains on 'China" setting.</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Need help with GE triton</title><link>http://www.fixya.com/support/t120766-need_help_ge_triton</link><description>I bought this house almost 2 years ago and had the dishwasher  upgraded to this model. We really haven't used it much in 18 months. Now I am ready to use it again, but when I start it, there is a horrible knocking sound under the sink. It only...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Kenmore dishwasher 665.1671590</title><link>http://www.fixya.com/support/t114436-kenmore_dishwasher_665_1671590</link><description>Dishwasher quit filling with water and I found the solenoid coil open on the inlet water valve. Replaced the coil and checked. The water sonenoid is working now. Water is coming out of an opening near where the water enters the sump. It is an open...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item><item><title>Whirlpool dishwasher not working</title><link>http://www.fixya.com/support/t285213-whirlpool_dishwasher_not_working</link><description>I have a whirlpool dishwasher Modle GU63XTLQ0 SER # FP1801615. The Clean light flashes seven times and then pauses, and repeats. I am not able to cjoose a cycle and the machien is frozen. I have turned the power to the dishwasher fo an hour to...</description><pubDate>Wed, 09 Jul 2008 09:54:32 GMT</pubDate></item></channel></rss>