Brands:
Family Lines:
11,917 Products for Car Amplifiers
-
what guage cable should i use for a Kenwood KAC...
I suggest 8 gauge wire. If 4 gauge doesn't cost much more, than get it. Then you will always have room for an amp...
Craig Jones- May 21, 2012
- Car Amplifiers
- 2 Solutions
-
will a Lanzar Vibe 286 4000 watt amp push a power...
Yes it should do the job. You will need to wire the sub in series and make sure you have a 4ohm load on the amp. It...
palmerk22- May 18, 2012
- Car Amplifiers
- 1 Solution
-
-
model KR-720
Rms the power Is a continuous power that an amp or radio should never run less than ,,,Max power is usually a gimmicky power...
Roger Brault- May 7, 2012
- Car Amplifiers
- 1 Solution
-
Fuse apx200m
HI, If the fuse is blowing of then there is problem with the inverter stage of amplifier. There is an inverter...
Peter nieuwenhuizen- Apr 27, 2012
- Car Amplifiers
- 1 Solution
-
capcell 600 stays on when car off
the capcell will not turn off because they are direct wired to the battery not wired through the ignition.
loke7017- Apr 26, 2012
- Car Amplifiers
- 1 Solution
-
power acoustic lt620-2
It's a straight forward swap, just make sure you line up the cathode leg (the one nearest the stripe) the right way before you...
lalbert8- Apr 22, 2012
- Car Amplifiers
- 1 Solution
-
service manual Yamaha p5000s
www.retrevo.com/support/Yamaha-P5000S-Amps-manual/id/962bh143/t/2Free download of Yamaha P5000S User Manual....
Nabeel Waheed- Apr 18, 2012
- Car Amplifiers
- 1 Solution
-
can i run my amp at 1ohm and how
You should look your amp up online to see if it can handle 1 ohm stable....most can't. Lower ohmage does make the bass...
- Christapher Lonsby
- Apr 10, 2012
- Car Amplifiers
- 1 Solution
