HELP! I'm trying to install a new Beckett oilburner model AFG on my hotwater boiler. The existing...
(More)
HELP! I'm trying to install a new Beckett oilburner model AFG on my hotwater boiler. The existing system was 2 zones with 2 circulator motors using a R8182H and R845A. The new burner has a R7184A electronic oil primiary control. Need to know how should I wire it since the R8182H has a CAD safety with 2 wires with no place to connect them too and the R7184A also has a CAD safety, wired into the burner. The instructions are showing to connect the orange wire from the R8182H to the black wire (Limit) on the R7184A and the white wire to white wire L2 and capping the 2 yellow CAD wires on the 8182H and no other instructions as to what to do with the other control R845A. When connected the Beckett motor will not run nor will the display panal light up and all that happens is the R8182H shuts off on safety. How should I wire the R8182H and R845A to the R7184A
Do you have a heat limit switch for a PR8-5 Patton Electric Heater, 1500 watts
Clem Morris
E-mail:...
(More)
Do you have a heat limit switch for a PR8-5 Patton Electric Heater, 1500 watts
Clem Morris
E-mail: dorismorris1@aol.com
fax and phone: 623-572-5641
it won't shut off. I hit manual shut off and it keeps burning. I know I need to replace the wick,...
(More)
it won't shut off. I hit manual shut off and it keeps burning. I know I need to replace the wick, but that shouldn't keep it from turning off.
Traditional water heaters use a storage tank to hol... Read More
Traditional water heaters use a storage tank to hold heated water until it is needed. They typically run off of natural gas, but electric and propane heaters are also common. In addition, tank less water heaters are available. They operate by routing water to where it needs to be instead of storing