http://www.fixya.com/support/alpine/car_amplifiersSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 27 Dec 2009 14:33:42 GMT80http://www.fixya.com/support/t2713058-alpine_pdx1_600_amp_cuts_offhi, i have a Alpine mono pdx1.600 amp running a single 10" boston acoustic g5-44 sub and the amp cuts off after a few seconds at higher volumes. eventually the amp will turn back on but once the volume is turned up again, it cuts back off. On the...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2666685-amplifier_displays_curI have a V12 1000W amplifier. it's hooked to 2---15" Kicker subwoofers, 2 6X9" alpine speakers, and 2---4" alpine door speakers. It played well for about 1 year, but now if I raise the volume up pass 12, it shuts off?Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2441932-alpine_mrd_m605_amp_recentlyI have an Alpine MRD-M605 amp that recently has started having issues. My subs only produce sound when my deck is turned up full blast. The setup had been working for over a year with no problems. The subs are not blown as they still play flawlessly...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2291877-programing_alpine_mrd_m1000i need manual so that i can program my alpine mrd-m1000 i need a manual to program my mrd-m1000, i have two L7 subs running from itSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2290584-no_sound_coming_outi hooked up my amp up right but no sound is coming out what should i doSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2263240-get_amplifier_workI have a 99 GMC Denali I had a local store hook up all the stuff to adapt from bose system to a after market CD player a Alpine model# cda-9827 and I put a sony 1200 watt amp in to.My problem is I can't get the amp to work or push the subs.I've did...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2165573-amp_powers_up_hear_working_but_soundAMP POWERS UP, I CAN HEAR IT WORKING BUT THE SOUND IS REALLY REALLY LOW...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t1899797-head_unit_1_set_preamp_outputs_conn_4hi i have a alpine mpr-f320 my head unit only has 1 preamp output the amp has two sets for the input. i was wondering if i can still use all 4 outputs from the amp to drive 4 speakers or can the amp only output on 2 channels seems i only have the two...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t1888399-wiring_car_stereo_amp_directI am making a homemade Boombox. I have the stereo, speakers and amp installed in an igloo cooler. I have a 12v tractor battery that I will use for the power supply. I purchased a toggle switch for the power on/off control. I am a novice and would...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t1370679-sub_quit_workingi have a kenwood head unit, a 300 watt alpine amp, and a 10 inch boston fused subwoofer. i got in my car and my sub wasnt working. I checked the fuses in my sub and they were fine. Then i checked the fuses in my amp and they were both melted. i...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t849497-amp_problemsmy alpine amp just cut out one day and never turned back on, i found that the positive wire goin from the battery to the amp was split because of my hood hing. i bought a new wireing kit but the amp still wont turn on. i checked all the wires and...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t446670-pdx_4_100_in_protect_modeHow do I take an Alpine PDX 4.100 out of Protect Mode? One LED is now red, and used to be blue on the right side.. what does this mean?Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t248522-reset_mrv_t757i also have the same problem with my amp the led on the front of my amp (for the power supply) blinks orangish red if it is a problem with low ohms is there some kind of reset on the amplifer needed to be actuated once i fix the resistance problemSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t148972-cur_error_mrd_m1005hi guys i just got this amp attached to two 12 inch type r subwoofers. It lasted for about 10 minutes then went out and it says cur. Do you know what i can do?Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t147676-alpine_v12_mrv_t707Hey i just got a alpine V12 MRV-T707 and i dont no how to instal the power stuff i no how to instal the speakers i just need to no how to instal the power like the ground gos to a ground sorce but there are to othere places beside the ground 1 says...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t129655-amp_problemI have an Alpine MRD-M301 amplifier and was wondering why it wasnt powering my sub/ working, It has everything hooked and wired up but for some reason it wont work, well the LED screen turns on and it says that there are between 12 and 14 volts going...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2294351-amplifier_wont_move_subsI have an alpine mono Channel MRP-M1000 Watt amp with two Alpine 12'' SWR-1242D Dual voice Coil 4-Ohm Subs. my problem is that i cant get any bass to come out. i have all the wires hooked up. all the fuses are good and the blue light on the amp...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t1874315-alpine_mrd_m500_amplifiermy alpine MRD-M500 amplifier, says E-3 and, my subs aren't working. but when i shut off my truck, and turn it back on, my amp is fine and subs work, for about 10 seconds, then quit, and my amp says E-3 again... how can i fix this?Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t1760243-amps_keep_turning_offhave 2 JL audio mono block 500/1 amps hooked up to 2 JL12v2W6's an a 1.6 farad lanzar cap with 0ga running from the battery to the cap an to the distrubution block then 4 ga to my amps. then the grounds from the amps and i the cap to a smaller...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t305201-alpine_mrp_m650_amp_cutting_outi have a alpine mrp-m650 amp, had it professionally installed about 14-15 months, with a half faret cap, about 3 weeks ago i was driving home and had it cranked up and started to smell something burning, i immediately shut off the radio and the...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t120136-no_soundMy amp lights turn on but no sound. Does any one no how to turn off the safe modeSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t663419-wont_turnMy Alpine 850 wont turn on.. I set up just a cheap little amp that pushes 130watts rms to my high range front speakers. Unfortunately i played them a little loud and the speakers blew also cause they were old. But my problem is i had 2 amps in 4...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t214289-help_goodmans_car_stereoall of the conections are fitted correctly but there is no power coming through so it isn't workingSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t117154-amp_heats_up_quickly_melts_fuses_shutHello, We just installed this amp and all of the channels work fine but in a short period of time and even w/o the sub channel connected, the amp heats up very quick and it melts fuses ( it burned one fuse, but the other one melt but continued...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t3099063-sub_pops_when_first_powered_upSub pops when first powered up, then has intermittent outputSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2685477-amp_keeps_cutting_offhi i have a 1000 kenwood amp and it keeps cutting on and off when i put a 30 amp fuse in, it blows the fuse but when i put in a 40 amp fuse it plays and once the bass kicks in after about 30 to 40 seconds it cuts off, and stays off for about a minute...Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t2583890-blue_light_flashingThe blue light is flashin. it has power and everything is tight and plugged in. no fuses r blow but the blue power light that is normally always on is now flashingSun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t226721-alpine_mrd_m500where can i find a manual for alpine mrd-500 mono block amp?Sun, 27 Dec 2009 14:33:42 GMThttp://www.fixya.com/support/t191947-no_power_ampi have the alpine-f545 4 channel amp and the fuse's have blown a few times but now the amp is not turning on there is power running to the amp but no power leaving the amp wat do u suggest??Sun, 27 Dec 2009 14:33:42 GMT