http://www.fixya.com/support/acer/multimedia_projectorsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 08 Jan 2010 13:03:33 GMT80http://www.fixya.com/support/t3399458-cannot_get_signal_when_connectingto my laptopFri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t3259577-manual_or_handbook_acer_x1160pzIs there a Manual or handbook to download for Acer X1160PZ Projector, DLPFri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t1859465-picture_distortionBought an Acer X1160Z DLP Projector recently, and I'm connecting it via S-Video cable to my DVD and Blu-ray Players. Each time I've used it there's a slight, frequent distortion with the picture (a horizontal trembling, wavering of the image) which...Fri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t1582187-want_connecti want to connect a projector to my computerFri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t978478-acer_ph530_color_wheelWHERE I CAN BUY AN ACER PROJECTOR PH530 COLOR WHEELTHANKSFri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t751522-pd523_no_picture_led_blinkssorry for my bad english anyway. so i have the problem i receive no picture. when i start the pd523 it sounds like a cooler inside tries 4 times to start and stops again. then the cooler on the front starts running. the red lamp-led as also the...Fri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t287269-toshiba_portege_m600_cannot_connectI have never success to display my presentation if I use toshiba portege M600 and connected to projector Acer PD525. The display is only "no signal". I had reduce the display resolution to lowest. Change with good cable. But its ok if I use another...Fri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t286105-acer_projectorfitted a new lamp in my acer projector but it wont workFri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t969364-power_up_allMy church has an Acer pd120d projector with at most, 500 hours on the bulb. It won't power on at all, no lights, no fan activity, nothing. Acts like it isn't even plugged in. If the bulb is shot would it act this way or would there at least be some...Fri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t101680-acer_pd113_dlp_projectorAfter about 5 mins my image develops about 6 or 7 vertical bars across the entire image. These bars are made up of about 7 or so black thin lines and make it difficult to view image on screen. if I turn the unit off for a few mins and turn back on...Fri, 08 Jan 2010 13:03:33 GMThttp://www.fixya.com/support/t2284741-set_upI dont have a manual for acer pd112 multimediaFri, 08 Jan 2010 13:03:33 GMT