Lionel 52025 Madison Hardware Tractor & Trailor "train switch wiring" Questions

wiring 1122 switches for crossover want to switch so left switch on outer track connects to reversed left switch to make crossover Question is unclear. But if you want both switches to throw at the ...

...train (wheels and center rail connector)? Are the tracks new? Is the lockon new? bad connections, wires to/from the transformer, or maybe a real dirty track.try spraying a very small amount of CRC ...

need wire and hook-up diagrams for Lionel train 5121 and 5122 switches http://cs.trains.com/TRCCS/forums/t/195035.aspx

...can supply a fixed voltage to the switch. If the power is taken from the track in conventional running and the train is set to a low speed, the voltage may be not sufficient to throw the

How do I wire a 027 switch with lights that tell me if it is curve or streight. see attached pdf, page 4. http://www.lionel.com/media/servicedocuments/70-5121-250.pdf

...train where a piece of rolling stock sits on the switch. I called the Lionel technical people and they said this is normal. I don't think so. Any ideas? Ken You must use insulator pins on the inside ...

I have a pair of vintage 027 remote switches (right & left hand). When I flip the lever on the remotes, the track will only switch in one direction. I can't get it to go back. First reverse ...

train stops for as long as the button is depressed (and lights in buildings go out as well), but then continues forward once the button is released. Any hint you can offer is appreciated. there should

I am having trouble getting power from transformer to track without the wires getting hot. Engine does not have enough power to go around the track. Track is new track is connected wires are connected

CANNOT GET THE UNCOUPLING TRACK SECTION TO WORK THRU TRACK POWER - WHAT IS PROPER WAY TO HOOK UP RED AND BLACK WIRES? LIONEL FASTRACK Track power is not recommended for this uncoupler. Use an aux ...