...Hot cold, I get cold water first, then hot water for the rinse. Any ideas as to what could be the problem. It sounds like you have the hot and cold water lines to the washer reversed. Try turning off ...
Question about Westinghouse Washing Machines
...hot/cold, warm/warm, etc.) If I connect hot water hose to cold inlet and cold water hose to cold inlet, the hot inlet valve opens but the cold valve doesn't open after pressing start. I get the FH ...
...to the cold valve on the machine and the hot tap to the hot valve. on the machine it will have cold or c for the cold valve and hot or h for the hot valve. please reply if you need further
Question about Admiral Washing Machines
...hot, half cold) and hot( which should be ALL hot water, no cold added at all!) but the hot setting has cold coming out too. Depending on the age of the unit you may be looking at a faulty switch. ...
...cold? The hot is hot and cold is cold but warm is cold. There is too much pressure on the cold feed, reduce the pressure on the cold by partly closing off the tap on the cold. Or ensure the hot feed ...
Question about Whirlpool Washing Machines
...hot wash,cold rinse; cold wash, cold rinse;warm wash, warm rinse; and sensor cold wash, cold rinse. hot water is getting to the washer- have warm wash, warm rinse - but not hot when switched to hot - ...
...hot water to the cold solenoid. or the wires have been interchange, the hot water wire was plug to the cold solenoid and the cold water wire was plug to the hot water solenoid. or hot water is still ...
...hot/cold now reversed Maytag performa washer hot and cold valves are hooked up correctly, but washer is giving hot water on cold setting and cold water on hot setting. Just happened suddenly after 1 ...
...hot to cold & cold to hot) and try again. If you get COLD only, you probably have a bad COLD solenoid - if HOT only you have a bad HOT solenoid. If you get HOT only, you probably have a bad COLD ...
Question about Washing Machines
HOT and COLD on then water is room temp when set on HOT. COLD turned off at valve and water is HOT when set on HOT. Checked screens. Mixing valve? or board? Sounds like hot and cold hoses are reversed
127 questions posted
Usually answered in minutes!
4 Questions