5701 VIPER 5701 2-WAY ALARM w/REMOTE START "gets 7 flashes" Questions

7. 7 flashes is timer mode/turbo mode manual mode error 8. 8 flashes is neutral safety shutdown ( the remote start control switch is in the off position). 9. 9 flashes is low battery (voltage setting)

How to reprogram Python 4Button Remote 474P ? My Python 4-Button Remote 474P lock and unlock the doors with the same button (the lock button) and the unlock button do nothing. I had the exact same ...

7 times The seven flashes from your parking lights is the remote starter error diagnostic. Seven flashes is the message for neutral safety wire. The toggle switch under the dash is in the off position

...7 times and nothing happens. Any ideas??? Yes, the seven flashes mean that the tachometer setting has not been programmed. If you hooked up a tach wire (green with orange stripe) to an uncommon coil ...

...3), I get a response of 7 flashes- according to the manual, this means "start cancelled" What do I have to do to get this to work? were you standing beside the car when this happened or in the ...

2001 jeep grand cherokee /viper 5101 rs with keyless entry all wires are hooked up properly as far as im concerned but remote start will not activate i have a 7 flash diagnostic code I'd say the ...

...flashes but nothing happens. Try this first, unplug the 2-way antenna on your windshield. Let it sit for at least a few minutes. Try recoding the remotes after you replug the antenna back in. This is ...

...7 flashes from a Compustar brain there is something not working right with the manual reservation mode. Double check to make sure it is 7. If it is then go see an authorized Compustar dealer and have ...