1995-1997 Chevy 1500 Truck Ignition Starter Alarm Switch "install starter button" Questions

starter installed and;when I press the start button the lights come one and there is relay sound but it dont start Did it work before? Did you just install? you may need a 791 factory antitheft module

...button start. My installer tried 3 different models of remote starters and none will work. Any advice out there for me? You need to bypass the VATS (vehicle anti theft system) to get a remote starter ...

...starter just installed model 40027, and it takes atleast 8 seconds on holding the remote button before it starts, even right next to the car, is this suppose to do that?? To initiate remote starting ...

...button too long on the remote fob, the starter module goes into a setup "menu", which is possible. You didn't change the fob batteries lately, did you? It sounds like you will have to 'retrain' the ...

...starter has been replaced twice (within 2 months)- the only 2 times I used the stop button It is possible that the Tach/RPM monitor circuit (an integrated system that informs the RSM [remote starter ...

button, the light should go off. If there is a remote starter shut down installed, it should be located near the valet switch. It's a toggle switch that may still have a red boot over it. Flip the

...starter in my 2005 jeep liberty. I have to hit the button several times to get it started. I have already changed the jeep's battery. There is some sort of a feedback to tell the starter if the unit ...

...sequence. I have a new prestige remote how do I add an additional remote to work for my car its a 1983 cutlass olds. I thought u have to hit the starter button twice to start and twice to shut ...

...starter buttons are combined. First, the extra set stopped working then a month-ish later the other one stopped for a week and then started to work for another 3 before it stopped altogether as ...

...STARTER IS CLICKING AND/OR FLASHING THE PARKING LIGHTS AND IS NOT RESPONDING TO THE REMOTE, IT IS IN SAFE MODE AND NEEDS TO BE INITIALIZED BY DOING THE FOLLOWING: If you have a 4 button remote, you ...