...1 time ( 4 chirps),press option button. Turn ignition off, test. After pressing the corresponding buttons on the remote programming sequence above ,you should hear confirming chirps from the
Question about Vehicle Parts & Accessories
...SEQUENCE REQUIRED TO START THE CAR TAKING FEEDS OFF ALL TERMINALS ON REAR OF IGNITION SWITCH. HOWEVER THE SUPPLIED DIAGRAM STATES THAT YOU JOIN UP ALL .5 WHITE CABLES TO +12V AS WELL AS ALL 1.5 RED ...
Question about Autopage Vehicle Parts & Accessories
...valet switch, and then press the LOCK button on the new remote. The horn will honk if it programs. Turn ignition off and the horn will honk 3 times to let you know it exited the programming
active. But, if the remote start sequence is terminated by any of the shutdowns ( ignition, brake, hood or neutral safety switch) while the remote starter is running, the timer mode will be terminated
Question about Astra Vehicle Parts & Accessories
...ignition OFF - ON ? OFF ? ON ? OFF. Warning! At the end, the key should end at OFF. If sequence is made successfully, the parking light will blink 4 times. ? Push any button on the transmitter to ...
...ignition. I pushed the Valet button (it has a blinking blue light, mine is near my rear view mirror) and held it. Then, I pushed it 3 times, then held it down a 4th time. Then, I pressed the lock ...
Question about Vehicle Parts & Accessories
sequence, starts, and shuts down a couple seconds later. Can anyone help me? If you have grey keys for your ignition, than the transponder is being bypassed upon remote starting. You will to check for
Question about Audiovox Vehicle Parts & Accessories
...sequence of putting one key in the ignition, then the second, then the new blank key so the cars computer knows to allow that key also. If you do not have 2 original keys, then you need to go to ...
Question about Audiovox Vehicle Parts & Accessories
...sequence, the Black wire will be active at the same time Ign. 3 becomes active, and will remain active until the vehicle has started. This will be used for one time read transponder circuits. c: When ...
the past 3 years. The sequence is as follows: turn the ignition on, press and release valet switch one time. Press and hold valet switch, press lock button on remote. Release valet switch. Test system
510 questions posted
Usually answered in minutes!
71 Questions
51 Questions