Car APS921 Remote Starter - Keyless Entry "entry wont program" Questions

...entry remote wont unlock or lock anymore changed battery still wont work i have a crimestopper alarm keyless entry the remote has four buttons lock unlock, aux , and slnt, i dont know what the last ...

...wont work. How do I reprogram it To program remote: turn ignition on press and release programming switch once ( the siren/horn will honk once) press and hold programming switch while holding ...

i have a 471t model remote starter, it fires up i have a DEI 471T model remote starter, it fires up than dies out immediately,than tries to refire, but wont run . its in a 1998 Ford taurus Could be ...

i have a 2009 ford f-150 with the BD remote start everything comes on the truck wont start . Ignition comes on if i hit the break the lights go off prevent theft like its supossed to but the starter ...

Connected all wires as instructed and when battery is hooked back up, siren just blast and remote wont stop it. There are two reasons that the unit does not respond to the remotes: the antenna is not ...

...I follow the instructions and as soon i hit the vallet button it chirps. It wont let me program it. turn key to on position, push valet 5 times then alarm will chirp then hit the lock button on ...

...wont work and the power locks and stuff do. It says i need to program the tach on the unit so it knows the vehicle is running. I cant get the darn thing to go into to program mode. Its an auto start ...

remote start not working Battery was disconnected from the vehicle for about 2 weeks and now the remote start wont work. It goes through the cycles but wont innitiate the turning over process unless ...

...wont activate. Try to reprogram the remotes to the alarm. Have your vehicle key and both remotes ready. The way to do this is as follows: 1. Turn ignition key to run position. 2. Within ten seconds ...