Prestige APS686T Remote Start and Keyless Entry System with Additi "program car started" Questions

...car starter worked last week but this week it won't start. Changed battery in the remote and still won't start. It will unlock and lock the doors but just won't start. It probably needs to be ...

...program the TACH wire.. open the door start the car with the key, between 5 seconds press the valet switch 1 time and press it again and hold it until the led flashes and the car will beep and then ...

...the starter itself won't start no matter what i do. can anyone help me ? or if you know how to reprogram the remote please show me... did you follow the procedure for programming the remote

car started because of the security system has us locked out If it's an Alpine system; turn the ignition on,off,on,off,on,off. The car can start on the fourth turn. If it's a Cod alarm: Programming or

...engine on at the first attempt the remote is going to try 2 more times this is the way it is, but you should check the tack wire program to make sure is properly programmed What kind of car do you ...

car so you can program it for that car and to make sure you are using the right interface module. If you do have the correct parts then remove the module and make sure all connections are right and no

...Program: 1. Press the Lock button on transmitter 1 until the siren responds on Car with a confirming chirp; the first transmitter is now programmed to Car. Exit: Turn Ignition to 'OFF' position, or ...

car but doesnt unlock/lock doors I have accessed brainbox and able to program fob. Won't lock or unlock but will auto start. Any help? Relays are working and lights confirm programing but no action on

...car starter I tried to program the 7153v remot that came with the starter to do 2 cars now they both start at the same time how do I unprogram the remote from one of the cars must the same program to ...

...seven flashes of the parking lights when you attempt to remote start is the tach signal not being programmed. If you hooked up the tach wire already, turn the ignition on, press and release the ...