...if your chain isn't too stretched. Look for pieces of plastic in the oil, which will signal work guides. It is possible you are hearing the valves rattle, and it would be time for a valve
my valves are chattering when i start my bike Hi, If you have recently serviced the bike, make sure that you have used the correct grade of motor oil. Alternately, it is necessary to adjust the valve ...
my bike has only done 8000 miles any help would be appreciated. Exhaust valve actuator cables out of adjustment. Adjust the freeplay on the "pull" cable(just a little) and retest until light stays off
adjustment. Could also be the fuel valve pick-up screen in the tank. Remove fuel line from carburetor and turn on fuel, if it flows out nicely then it is a carburetor issue with the float assembly, or
...the carbs --- is that going to happen by cleaning or replacing parts such as needle jet, needle valve, and carb jets? Syncing the carbs does not sound so bad if you have the vacuum presure gage ...
...knocking sound with hesitation then revs OK. What are the possible causes? It's possible that your valve clearances need to be
the motor makes a ticking noise where there are the valves. He was not ridden for 1 year G'day. A ticking noise from the valve cover could be a loose cam chain or a loose valve clearance.Since the
What is included on the full tune up for 2000 r6 air filter, plugs and a valve adjustment.
Question about Yamaha YZF-R6 Motorcycles
my 2001 YZF-R6 has problems staring when it is hot and when it does start the first few seconds almost sounds as if the engine is flooded. the amount of time it takes to turn over my engine is causing
Question about Yamaha YZF-R6 Motorcycles
2001 yzf r6 ticking coming from valves is it just the timing chain loose? when the bike starts its ticking and as im riding its gets louder. No, the valves need to be adjusted.
116 questions posted
Usually answered in minutes!
288 Questions
145 Questions
98 Questions
99 Questions
108 Questions