Question about Yamaha XT 125 R Motorcycles
...hi you are set on kilometers not mph speed adjust at switch Has it been used offroad with Enduro wheels? Think you can re-set to road using the toogle button by the clutch. check the manual if you ...
I need the part number for rear wheel bearings but dont want to strip back wheel unless I really have to It would be tremendously helpful to know what bike it is that you are working on, but - you can
my speedometer is not reading right why? You may have supermoto wheels on a speedo that is set up for enduro wheels or vice versa. I had the same problem myself. A quick visit to my local dealer and &
yamaha DT175 1975 -- won`t idle back hi, i have an old DT175 enduro..year 1975 Cannot stop it from reving too much..Will not idle back...I suspect it has seals leaking in crankcase,would this be the ...
how do you ajust rear wheel so it is alignedright? 1.loosen the bolts on either side of the bike at the rear of the frame. this is what allows the back wheel to be adjusted. aka wheel adjusters. ...
how do you disconnect the rear wheel on a 1990 CBR 600 as in remove?if removal easyest way put on centre stand slacken chain adjuster nuts,then slacken wheel spindel,push wheel backwards so chain ...
Question about Yamaha XT 125 R Motorcycles
i have a puncture in my front wheel of my Suzuki FXR150 2001 i have a puncture in my front wheel of my Suzuki FXR150 2001 and i need to know how to take the front tire off the bike Lift the front ...
How to remove rear wheel that is mounted on a 94 dyna wide glide harley Simplified version: Get rear wheel off ground. Remove rear belt guard, if equipped. Loosen axle adjusters. Loosen Axle nut. ...
how to remove rear wheel on a 1981 650xj yahama hi m8,,undo the wheel spindle nut ,,tap the spindle out of the swing arm,and untill the spindle is out of the wheel,, then undo the rear brake at the ...
trying to remove rear wheel I need to remove my rear wheel? Raise the rear wheel off the ground making sure that the bike is properly supported and will not fall. Remove the nut from the end of the ...
52 questions posted
Usually answered in minutes!
27 Questions
29 Questions