2006 Yamaha V Star Custom "adjust carb big bear" Questions

Ad

...adjust the float on my 2000 big bear carb...Carb is a mikuni 5fua L2 remove the carb, take off the bottom float bowl on the carb. Then while holding the carb upside down, you want to set the floats ...

Ad

Question about Yamaha V Star Custom Motorcycles

1 Answer

...years cleaned carb and gas tank idles fine but when it warms up it back fires thru carb what might be worng it is a atv big bear 350 1987 500 miles Check valve adjustment. And...one might be

Ad

Question about Yamaha V Star Custom Motorcycles

1 Answer

...like the are just vent lines. when i turn the gas to on or to reserve the gas pours out these two lines ??? this is a 1986 big bear four wheeler the floats in the carb are stuck or adjusted to ...

...Big Bear died and will not start now. Driving for awhile and then suddenly the bike died. I changed the spark plug and it has lots of spark. Lots of compression. Fuel is getting to the carb. Any ...

Question about Yamaha V Star Custom Motorcycles

3 Answers

...carb. it adjust's the butterfly needs to be balanced. or take carbs off look inside at the butterflies can use a verry small drill bit to adjust make them all the same. or get carb sticks. and ...

...carb changed the oil and adjusted the valves. Checked the timing tensionier which is still along way from bottomed out. With that all said the bike runs like a top until it gets warm then gets a ...

Question about Yamaha V Star Custom Motorcycles

2 Answers

...carb into a sealed crankcase cavity, then goes into the cylinder then gets compressed and ignited then goes out the exhaust pipe. While in the crankcase, it is able to lube the cylinder walls, the ...

Question about Yamaha V Star Custom Motorcycles

1 Answer

...carb once in awhile too. If the engine is running rich the throttle response will be fuzzy and not too quick. The engine will burble, miss and blow black smoke. It will start easy but will run funny ...

Question about Yamaha V Star Custom Motorcycles

1 Answer

carb sync "service" change or check all fluids and oil new oil filter check and inflate tyres check wheel bearings, swing arm, head bearings adjust chain. check battery and all lights check brake wear

big bear and it starts but backfires and sputers. We adjusted the valves and cleaned the carb and the problem stoped but then did the same thing. Runs horrible but starts I would change the spark plug

Not finding what you are looking for?
2006 Yamaha V Star Custom Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...