2004 Yamaha YZ 250 F "oil put front forks" Questions

i need to know the right kind of fork oil to put in the front forks of my 2008 yahama yz250f and how many pounds the fork oil is i guess fork oil 10w

...put more oil in my front shocks yz 250 2006 hi JT, thank you for using fixya below is a thread from thumpertalk on where to get the manual for yz250 ...

...tighten till you put on fork tops. Now pour in measured amount of oil, again do not over fill. Put on fork tops and air crossover tube. Now tighten screws on bottom of fork. Finish reassembling

...oil to put in the front forks please. Question edited for a lot more clarity, 'year make model', first 3 words! FRONT FORK Capacity: 0,13 litre. 20W Fork Oil. ...

put too much in. The guy at cycle gear where I bought the fork oil said to top it off or fill it up but I don't want to burst my fork seals by putting in too much and he turns out to be wrong. Hi,

oil to put back in them. There are usually two amounts of oil to put in the forks. One amount is a "dry" amount to add when you disassemble the forks and then refill them. The "wet" amount is for when

...put a chock(I use an empty 5ltr oil container-but you can buy propper chocks from the bike shop) in-between the forks at top of the front wheel . Now when you pull the front end down it will stop on ...

...oil to put in. Your bike came from the factory with "Type E" oil in the forks. The viscosity of the oil determines the dampening effect of the forks. Heavier oil will stiffen the front forks, a ...

...put too much oil in the front forks and you are destroying your forks with every bump. Let out the air pressure to soften the ride. If some one has put too much oil in the forks , disassemble them, ...

...oil to put in yz 125 1999 front forks how much oil to put in yz 125 1999 front forks Check this info download: ...