2004 Yamaha YZ 125 "work gears" Questions

...dosn't move outward it has a broken spring on the kickstart mechanism.replace spring and all should work.(if the spring is broken you need to try find the broken piece with a magnetic pick-up tool as ...

it and the gear lever is not getting out of gear and when ever i try and tighting it , it just wont work ,please help me ? possibly the shifter came loose on the shaft that it is bolted on, there with

...--- ****!!! i was hoping to avoid it, tried putting it into gear and holding the tire - doesn't

bike stays in gear with clutch in i have a yz 125 2001 model when i put the bike in gear and hold the clutch in it stays in gear, the clutch lever has tention as it should , ive been told to see if ...

1987 yz125 clutch not working! I also have a 1987 yz125. when the bike is in gear and i pull the clutch in it doesnot put bike in N. i can see the cable moving when i pull the clutch but does not put ...

...would be great all so my gear shift lever strips a lot and the spline is worn down would JB weld work to keep the gear shifter tight on the spine?? Thank you How much was it smoking previously?

...use tranny oil.only motor oil.your gears are lubricated by your motor oil as well as your clutch.it works by a sump system.I use yamahlube for my bike. transmission oils are primaraly hydrolic fluid ...

...Or... if you mean in the transmission, Bel-Ray gear saver is good and synthetic. Motor oil will work, but shorten the clutch life a little. Or... if you mean forks, light weight fork oil, around

hey mate , got a YZ 125 02 was riding the other day and its just had a full enghine rebuild ,clutch stopped working and it wouldnt go into first gear but would go into second . is this because second ...

...like its going to blow up. I have been using the little screw to take the idle down but hasn't worked. TRANS HAS A WORN GEAR THAT IS WEARING UPON 2ND ...