2003 Yamaha V Star 1100 Classic "beam high lights turn" Questions

...high beam blows out immediately after turning the switch. Is this a bad voltage regulator or am I looking down the wring path. Thanks a bunch. How's the battery holding up? Check the voltage on the ...

high beam activation. The starter solenoid is down by the battery and if you jump across the big two terminals with a screwdriver (bike in neutral, please!) that will jumper the battery power directly

...high beam passing lights go out(should they go out when high beam is on?) I`m going by an 2002 wire diagram but don`t know if it is same as 05. Could the TSM cause this? Thanks- No, the TSM does not ...

high beam shuts off when on for a long time ford ed falcon Hi i have a 1994 ford ed falcon. everytime i use the driving lights they work fine but when i turn them on high beam they flicker then shut ...

high beam switch is thrown, low beam is fine. front running lights (blinkers when not blinking) work all the time. tail and licence lights work all the time. brake light and both turn signals come and

...high beam work? if it does then you are getting power and the low beam filament is burnt out. if the high beam doesnt work either, then check for voltage in the light socket in high beam mode, if no ...

...high beam and one for the high beam indicator light. This the way the older bikes are anyway. Take a test light and figure which one is which. Turn the ignition on where the headlight should be on. ...

turn signals not working. high beam indicator light not illuminating however high beam does come on. check fuse for signals,check for one bad bulb! replace bulb for high beam indicator!

...high beam comes on in low beam setting then the headlight and wiring are OK but the high beam contact in the relay is no good, (in which case you would replace the relay) or the handlebar switch or ...

...high beam indicator is on and my high/low switch doesn't turn it off. The headlight is not working at all either despite the high beam indicator being on. What could be wrong with the bike? I ...