...remove the thermostat body to change it? I have a 1985 Honda Shadow 500 VT500C thats overheating and would like to know how to replace thermostat body to replace . Its very tight where its at and i ...
Question about Yamaha YZ 250 Motorcycles
...Remove the wire and ck the ends. If there is any white on them/it replace. Plug gap also affects coil output, closer gap demands les from the coil and that is just what it gets, Less. Lawnmowers have ...
Question about Yamaha YZ 250 Motorcycles
...replace it i don't know what else to do. all the floats look good the piolet screws are just right the it idles good and the chock works great Did you sync the carbs and adjust to pilots after you ...
Question about Yamaha YZ 250 Motorcycles
...remove the ATAC-valve system? if not then let me know. there are things you should know and do to make sure it's working right. it works very well if maintained and adjusted correctly. as far as how ...
Question about Yamaha YZ 250 Motorcycles
...replace it. Then kick the engine over, and you should get the motor to turn over really easy. Place the plug back into the hole, and the effort to turn the engine over should be hard, if there is ...
...ignition keyhole (there are four #2 Philips screws that need to be removed before the cover can be removed to access fuses and indicator bulbs). If the fuse is OK, then the next possibility is that ...
470 questions posted
Usually answered in minutes!
76 Questions
10 Questions
1 Questions
11 Questions