...CDI unit. The ignition switch is usually located on the right side of the handlebar and has three wires connected to it: a red wire, a black wire, and a white wire. The red wire from the ignition ...
...CDI module and ignition coil used. Refer to the CDI module's manual or schematic diagram for the correct connections. Double-check all the connections to ensure they are secure and properly attached. ...
...thanks Do not use a universal CDI unless you have the exact wiring cross-over diagram, or have tech help from the manufacturer. You can short out the CDI and other ignition components like the
wiring diagram klr cdi no ignisan Purchase a new ignition. Wiring diagram will not help you as there are different resistors and diodes in the ignitions that make ignition work to start vehicle
...on your engine.Green wires from switch are all earthing wires.The black and white wire coming from the switch is the wire that puts the cdi to earth to disable the ignition in the off position
Question about Motorcycles
...re wire it and Where do I get the parts and diagrams to re wire? We offer brand new built to order CDI Units for your bike on our website. You can order online at the link below or by calling the ...
Question about Yamaha YZ 250 Motorcycles
...ignition switch (Its fitted 100%) I now can,t get spark to spark plug . My gut feeling is having put a live to one of the negative wires which runs to the rotor and also to the cdi that either the ...
470 questions posted
Usually answered in minutes!
76 Questions
10 Questions
1 Questions
11 Questions