Question about Yamaha TT-R 125 Motorcycles
...screw mixture air /fuel 2- wind the screw all the way in 3- unwind the screw 1 1/2 turn and this should be sufficient to set the carburetor back to its original settings for the air/fuel mixture . 4- ...
...where the idle screw is? its probably on the carb but idk exactly where, i know where the air screw is but nothin else the idle set screw located left side center of the carburetor brass slotted ...
...RPMs. If you are talking about the air fuel screw it should be 1 3/4 turns out. Make sure not to tighten it to tight as you can damage the needle. I hope this answers your question. Thank
Question about Yamaha TT-R 125 Motorcycles
...air screw in the bottom of the carb? I have no manual to check screw settings. download the repair manual here http://www.torrentreactor.to/search/haynes+yamaha+ttr+125+repair+manual 3D Mink False ...
Question about Yamaha TT-R 125 Motorcycles
...screw and air screw and spray into the screw holes. The low speed idle circuit is the problem so concentrate on the air screw hole. Put both screws back where they came from and turn each until it ...
...screw or air scew fell out of my bike?? bike bogs out now and oil coming out of the side of engine ??? Is it your idle screw or air screw you have a idle and air screw Idle is on the left side with a ...
Question about Yamaha TT-R 125 Motorcycles
...screw and air screw inward until they LIGHTLY seat. Now open each of them one and one half turns. This is the factory setting. Now set the desired idle speed and then adjust the air screw for the ...
...clockwise spring loaded screw untill idling raises now hand tight the air screw then slowly unscrew the air screw at one point you can find RPM raises now stop unscrewing and reduce the idling
air screw and the idling screw was turned. remove plug and pump out all the excess flooding by kick starter. Once all the fuelis dispelled turn the screw fully into and then unscrew about one and half
Question about Yamaha TT-R 125 Motorcycles
screw and air mixture settings i need the carbrutor idle screw and air mixture settings for a piaggio nrg mc3 air 2001. any help would be great thanks A service manual is a valuable tool with an aging
43 questions posted
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
316 Questions
292 Questions