Question about Yamaha V Star 1100 Classic Motorcycles
Yesterday my 2002 1100 VSX while crusing around 60 mph, lost all power, off and on a few times, speedo, lights, and power all ceased. I never had any problems before. This happened after an oil change
Question about Yamaha V Star 1100 Classic Motorcycles
what would cause the throttle to stick at the hand grip Causes for sticking are an abraded cable inner wire, a pinched cable, a cable gummed up with dirt, a gummed up twist grip assembly, an abused ...
...damaged? Inspect it to see if it has any physical marks on it that shows something has been abrading on it; Also check that the rotor is still securely attached to the output shaft where ...
Headlight not working. Fuses OK.. Bulbs OK. Check the wire connections and check for any abraded or broken wires. Chances are a wire has come unplugged inside the headlight housing. Also use a ...
Question about Yamaha V Star 1100 Classic Motorcycles
2003 aprilia atlantic with sudden loss of dash functions, lights The bike was involved in a minor collision 1 month ago resulting in fairing damage. I am able to start the engine and the storage ...
Question about Yamaha V Star 1100 Classic Motorcycles
no turn signals nohorn no neutral light Check the fuses. Check the wiring harness. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires? Is the bike ...
i am not getting spark for my 1999 rm125 it was running great and then just stop running and it seems like it was a spark plug or it was out of gas but when i was changing the spark plug i seen it was
Question about Yamaha V Star 1100 Classic Motorcycles
ignition fuse keep popping everytime i turn my steering wheel on my rf900 This sounds like a loose connection in the ignition wires. Anytime a spark is created the voltage in the like spikes. The ...
Question about Yamaha V Star 1100 Classic Motorcycles
Rear end electrics all dead! where do I start looking please?? The fuse box should be very near the battery. Start there. Next check the wires where they plug together at the tail light. Next look for
When the on/off switch on the handle is put to "on" the main fuse melts within 1 second. There is a hot wire going into the switch. Somewhere at the switch or after the switch the power is ...
195 questions posted
Usually answered in minutes!
469 Questions
192 Questions
110 Questions
106 Questions
77 Questions