...is unable to hold the friction disc against the flywheel tightly when the clutch is engaged. This causes the disc to rotate at a different speed than the flywheel. The high temperature caused by ...
Question about Yamaha YZF-R6 Motorcycles
what would cause the throttle to stick at the hand grip Causes for sticking are an abraded cable inner wire, a pinched cable, a cable gummed up with dirt, a gummed up twist grip assembly, an abused ...
...to hook up a tester too it and see what it is charging at. If it is above 14.5 volts, most likely cause is the
Question about Yamaha YZF-R6 Motorcycles
...was more willing to rev but still not good. do you thing the throttle bodies could be so far out to cause this fault? Have you adjusted the valves correctly? if they are too tight it will cause this ...
...the fuel tap and filter, the air filter and air ducts. As any of these components are blocked, will cause a similiar symptom. You should find it run better afterwards, if not I can help moving on to ...
...number starts at 15...without reving the engine..when i do reve the engine then it changes..it causes no real problem when i practice ride it..also my rpm needle, wen i reve it goes to like ...
2008 R6. Battery discharges completely when allowed to sit. Owner replace four batteries. Voltage checked with bike at 5000 RPM and is charging (14.4 V). When the bike is put on a Battery Tender, the ...
81 questions posted
Usually answered in minutes!
288 Questions
145 Questions
115 Questions
98 Questions
99 Questions