2001 Yamaha V Star 1100 Classic "clutch" Questions

Bike doesn't start with the clutch pulled in. I have a 2001 Yamaha V Star 1100. Since I have owned the bike, it has never been able to start with the clutch pulled in. The side stand switch works and ...

...is in time with the engin I have done the eng mounts Hi, If you are getting a vibration through the clutch lever when you pull the clutch in then this is a sign that your clutch plate has an uneven ...

...the engine over to start it. i already changed the battery. what could be the problem? The one way clutch inside the motor is slipping. On the back side flywheel is a one way clutch that grabs the ...

can you adjust clutch to stop sliping on 2000 v star 1100 are must it be replaced Your clutch cable should have about 1/4 inch free play measred at the lever, check this by pulling the clutch lever ...

why does my clutch slips under torque 2005 1100 v star? I replaced the clutch plates and the problem is still occurring. put heavy duty clutch springs in or spacers too increase the clamp pressure

How do I repair/adjust the clutch on the V-Star? If just the lever tension then just follow the clutch wire to the end where there should be and adjuster nut, You can also adjut it from the clutch ...

why is my clutch plates slipping on my 07 Vstar with only 10,000 miles I have tried adjusting the cable at the clutch lever but did not work. The clutch disc stuck together over the winter a couple ...

How do I adjust the clutch? The bike stalls out when I put it gear. You can try adjusting the clutch cable. There is a lock ring where the cable meets the clutch handle. Loosen lock ring then turn the