shift linkage runs from the top of the shifter arm to the front of the bike and the shifter pedal shaft arm. To adjust the length of this shifter rod you will either loosen the lock nut and remove the
...linkage is adjustable - just remove the bolt in the shift shaft arm and pull it off the shaft sticking out of the motor and put it wherever you want to set the lever. Never had to take my foot off of ...
...a number of things: improperly adjusted shift linkage or shift drum, bent shift fork, broken first gear. Do the other gears work? If you're lucky, it may be the clutch adjustment. Good
Question about Yamaha YZF-R1 Motorcycles
...to reach down because the front of the shift peddle is resting on the floor board . If adjustable, try adjusting the shift linkage rod. Or, readjust so the forward shifter pedal clears the
2012 flstc shift linkage adjustment The link rod can be adjusted for length. the shift pedals can be rotated on their shaft. (the bolt must be completely removed to remove the pedal)
...shift linkage. after bending it back shifting is an issue. Hard to find neutral and does not want to shift into 1st right or second very well. and higher gears too. Cannot really drive slow wont let ...
...shift linkage from the foot shifter 'up' the linkage rod. Where the linkage rod meets the shift shaft, right beside it you will find a gold colored Knob. Thats the idle adjuster. You will want to ...
...adjusting the shift rod and see if that helps. Another solution is if you havent change the oil in awhile you might try that as well, sometimes as oil breaksdown it will not lubricate as well causing ...
187 questions posted
Usually answered in minutes!
183 Questions
188 Questions
125 Questions
113 Questions
117 Questions