2000 Yamaha Royal Star Venture "light" Questions

brake lights don't work If brake light dosn't work using the front or rear brakes it is likely A blown bulban open circuit power wire to the brake light.Regards Andrew Porrelli

Brake lights don't work on 1983 yamaha ventura. I replaced the two bulbs, checked the fuse, and i have power to one of the wires that goes to the foot pedal "rear brake switch". Any more ideas would ...

...do the rear turning signals. This could be tricky. Make sure you have the proper factory suggested light bulbs in use in all 4 signal lights. Now take the front right limp out and try the left

how to unstick brake light on 2008 yamaha back brake light I stuck Hi The back brake light is on, right. You need to check two things: 1 there is a spring and switch connected to the rear brake pedal.

...switch may be broken. Check the "run/stop" switch as well as the starter button Is the neutral light working when the bike is in neutral? The Venture will start in neutral without using the ...

location of wiring harness for lights on a Yamaha Venture motorcy I am trying to locate the wiring harness on a Yamaha Venture motorcycle so I can hood up wires for a trailer lighting kit. Does ...

2008 yamaha royal star venture - trouble starting - battery is fully charged - hardly turns over as if the battery was weak If after market battery may not have enough cranking amps.Turn on lights an ...