...master cylinder before you try the calipers,to do this,simply pump up some brake pressure with the lever,hold the lever against the bar (fully applied)then crack the banjo bolt that holds the brake ...
...are not releasing pressure.This is the master cylinder.There is only 2 things in brakes,master and slave cylinders.Please get the master cyl. checked.I hope this is without abs brakes.Hope this ...
...pressure, if it is still tight than loosen the bleeder nipple on the caliper, that will help but make sure you give it a bleed when finished checking the fluid in the master cylinder, make sure the ...
Question about Yamaha YZF-R1 Motorcycles
...pressure as they need replacing with braided lines, if you have braided lines then could be just fluid needs replacing as it may have absorbed moisture or the master cylinder seals are weak and need ...
Question about Yamaha YZF-R1 Motorcycles
...master cylinder, the problem was still there.Then i changer le brake lever, it turns out it was banded a bit and it was braking slightly, enough for the pads to touch the disc and heat the fluid up ...
...pressure continuously, ensuring that the wheels never lock up and the rider can continue to steer in an emergency. The HLDI study compared insurance losses for 12 brands of bike with and without ...
Question about Yamaha YZF-R1 Motorcycles
...master cylinder and caliper and no signs of wear and tear...to me its like if the master cylinder doesn't have enough pressure to push the brake fluid......my conclusion ..faulty master
Question about Yamaha YZF-R1 Motorcycles
...you have a master cylinder that is bad it will not hold the pressure. Change it out. Check when you pull the brake handle and look to see if there bubbles come up most likely it the master
...pressure disappears Try bleeding the master cylinder first. Pump the brakes up,and hold lever in while loosening banjo bolt at the master cylinder. Loosen it slowly untill the fluid "rushes " out.The ...
...master you should be able to get enough pressure to push the rest of the air out the clutch slave cylinder. If you can not properly bleed the system this way, your local dealer has a fluid pump that ...
205 questions posted
Usually answered in minutes!
188 Questions
167 Questions
125 Questions
113 Questions
117 Questions