1999 Yamaha YZF-R6 "revs" Questions

...roar but just hunts really bad upto 3000 rpm. release the throttle then wind it back on and it revs. almost lick th engine rebuilt after a misfire, piston ring stuck in piston resulting in no ...

counter hits ten thousand then the clutch egages, i think it is that . it hits ten thousand and the revs flick up but the is no power. Sounds like you are gettig clutch slip ,check the clutch for worn

...Check voltage at the battery terminals. it should be approx 13-14 volts when running at about 2000 revs. these are not specific to your bike , these numbers may be as high as 14.7volts or 3000 revs. ...

...whether it will start first time. Regularly it needs a little twist on the accelerator before it revs in action. However, if you dont leave the revs high enough and allow the accelerator to return ...

hi i have a 02 r6 bike runs perfect when cold but when it gets hot the bikes revs start to drop and the bike dies, then battles to start till its cooled down for one or two minutes... changed plugs, ...

... no lights 14.4v ish rev upto 5000, stays the same 14.4v.. turn all lights on, 14.2 v rev upto 5000 revs stays 14.2.. thier was one time that the volts dropped to 14.1 when the lights were on at 5000 ...

...like it wants to redline never had the the problem before I installed those parts in neutral it revs with no problem Obviously the power commander wasn't installed right or is interfering with