1998 Yamaha V Star Classic "remove fuel pump fire" Questions

...fuel I rebuilt the carbs 2 years ago and it ran fine after i rebuilt them. spark plugs are fine. Hi and welcome to FixYa, Let's try process of elimination: remove both pugs; reconnect each plug to ...

...remove tank to fuel rail line from intake side)be carefull this results in a good fuel stream that may go everywhere. Oh yeah and no smoking. Hope this heps as it sounds like the pump is not getting ...

...fuel pump is running. If it is then are there any trouble codes. If not then I suspect your crank position sensor is bad. CHECK THE FUEL PUMP INSIDE THE TANK BY REMOVING DASH AND ACCESS PLATE FROM ...

...remove that first) Then once you have found it up plug it.The plug that is joined to the pump is the end you need.Now run some wires straight off your battery terminals( You should already have the ...

fuel tank, remove fuel ****,(fuel on/ fuel off/ reserve).( has rubber o ring type gasket), could also be a kink in the fuel line, check or replace spark plug's, you also may need to test your

...remove any fuel that is in tank,remove the tank and remove gas shut off and clean the screen,remove spark plug and do compression check on each cylinder,remove carbs and clean/rebuild(carb ...

...fuel pump not priming. Is there a relay on the bike, if so where is it ? And where is the fuel pump located ?? Help Hi guys, I know there are a hundred posts already with this title but I am ...

...FUEL PUMP WORKING REMOVED FUEL LINE UNDER TANK TURNED ON IGNITION AND NO FUEL IS DISCHARGED FROM LINE BUT PUMP SEEMS TO BE WORKING CAN SOMEONE SHED SOME LIGHT ON MY PROBLEM LIKE I SAID THE BIKE WAS ...

...fuel pump . the fuel pump had a broken wire i repaired that put new fuel in and it still backfires and dies. not your fuel or pump you probably have a loose ignition coil check them out if they are ...

...fuel gushed out it proves tht the pump is functioning. Getting back to spark plugs....remove one of the spark plugs and earth it on the cylinder head somewhere and fix the lead head to it and thn ...