1997 Yamaha YZF Thunder ace 1000 R "amp" Questions

clutch lever has no resistance & seems not to do anything. Engine cuts out when put in gear. (sidestand up!) does it have a cable clutch or hydralic clutchyou need a clutch or slave cyclinder.

voltage when revving the bike (14.5 VDC). Good luck and thank you for asking FixYa. I have a 03 R1 & have went through a stator and a recctifier using these cheap *** mega **** batteries they make

...7 is related to the EXup valve issue's loose/damaged Taco code 9 relates to the fuel level sensor & the cable under the tank unplugged. Also see visor down ...

my dt 125 is not quite right, revs are stupidly high & carb leaks the bike kicks over, but the revs are really high, and when i go to throttle it the bike cuts out. it is also leaking quite a bit ...

how to remove damaged oil seal &replace with new seal on yamaha thunderace yzf1000r 1996 motorcycle Damaged oil seal Where is the oil seal you are talking about?? Usually use flat blade screw ...

...alarm, it will start by joining the solenoid, have checked all modules, sol ok, start btton &wires good,contenuity ok, everything else works ok, just dead button, any ideas do the lights ...

after a 2 hour ride out yesterday in daylight,i always turn my lights on to be seen when returned home switched engine off opened garage went to start bike again and completely dead has a data tool ...

i have a yamaha thunderace 1000 & my spedo has stoped working.Its not my cable.can anyone tell me what it could be? Many Thanks carlo Go for a ride and take note of the trip counter/odo. Does it ...