1996 Yamaha Xv 250 Virago S "rear" Questions

How can I remove the rear seat of a Yamaha Virago 250? the nuts for the bolts located below the rear fender do not fit in a torque wrench... The rear seat is held in place with a single bolt near the ...

...the first year. Then lost power. you pull front plug wire off while running it dies instantly. pull rear wire off it still runs rough. if you leave wire close to plug you can here it jumping arc. it ...

2007 yamaha 250 how do I instal saddle bags without moving the rear signals? You could try trimming the leather, but almost every case with saddlebag installations require refitting rear turn signals.

The new rear brake cable is way too long. I re-checked the part number and it is correct. It is routed correctly. But with the tension fully adjusted, there is no braking at all. I tried removing the ...

...wheel removal and simple removal of brake hub to access. 2. The cam that expands the shoes (when rear lever is actuated) runs through a waterproofing rubber grommet. This grommet can often tear

...clutch master/lever has a safety switch that tells the bike if the clutch lever is in (no power to rear) or out (power to rear). After almost 30 years this switch may have failed, making the bike ...

...go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, ...