Fujitsu 24C1 Air Conditioner "reset remote control fujitsue" Questions

...reset the sersor to the remote controller. Tells us to consult an authorised service personnel. How do we override this lock and reset the thermo to the correct location? Remove battery from your ...

...if the light is present then the remote is ok and the unit receiver board itself is defective. Check also if there is a reset or rst button on the remote control, press the button and test the

...remote first,it may help. failing that it is time to call the serviceman. Also try turning the power off to the Ac unit for about 5 minutes and then back on again. This will reset the electronics and ...

...Remote control appears to be working properly. Green timer light on control panel is flashing. A/C will not turn off unless turned off at mains. Many thanks Robert Pryde Sydney Australia The unit has ...

...is defective.If the remote control still good try to press the RST or RESET button on your remote control and try. If wont works it means that the reciever board in the indoor unit is

...remote control and reset it and try. Check also if there are error codes in the unit, reset the unit by disconnecting the power supply in the unit for 10 sec. and "on" again and try. The unit can be ...

...reset the unit via the remote. Unit now only produces fan air. No cold air. Thanks/Aloha, Jim james.rollison@navy.,mil I had a similar problem with only fan air then the blinking lights, found out ...

three days ago. remove front cover-pull from bottom and lift up at top reset button is above lights try that first , other checks remote battery, control wires 1-2-3 from condenser to evaporator board

Fujitsu inverter fan working.. Shows red operation light briefly then timer light flashes twice.. Not cooling or heating Did you try resetting remote control and aircond?

...remote reset Check that the circuit breaker in the switch board has not tripped, then check the isolator near the outdoor unit has not been turned off. After that, check your remote control is ...