...for years but never tackled these carbs. do one at a time use proper carb cleaner, lay the bits out carefull on a clean bench or table then you can rebuild it from the ones you have left
Question about Yamaha FZR 600 Motorcycles
...carb cleaner in the carbs. i dont know what else it would be? besides for maybe the carbs being so gummed up? if someone could give me a few tips of what i could do that would be awesome I would ...
Question about Yamaha FZR 600 Motorcycles
...carb cleaner in the carb. while cranking the motor but it just won't turn over. when i crank it it sounds like it is so close to turning over but it just won't . what do i try next? have u tryed out ...
...carb cleaner and give them a squirt and blow them out. do not try to use anything to clean them out, they are very very sensitive and one knick will change the jet. after that i would spray some carb ...
Question about Yamaha FZR 600 Motorcycles
carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray into all the little airways and fittings in the carb. Remove the idle screw and the air screw
Question about Yamaha FZR 600 Motorcycles
...carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray all the little airways and fittings in the carb. Remove the two screws on the outside throat ...
...carb cleaner and cleaning be done specially on the jets and pin holes. In some instances high idle could be caused by a vacuum leak in any of the rubber coupling between the carbs and the intake ...
...carb cleaner and compressed air through any of the passages in the carb body you can find, except the ones that lead up to the diaphragms, if you have CV carbs. You only need about 30 PSI if you can ...
...carb cleaner into the carbs and they seem to be getting plenty of gas all the lights are working when the key is on just want even try to fire. So anyone have some advice PLZ help I'm new to working ...
Question about Yamaha FZR 600 Motorcycles
i just got a bike and it needs alot of work how do i clean the carbs out TAKE OFF TAKE APART HIT EVERY LITTLE HOLE ETC WITH CARB CLEANER DRY REPEAT 3 TIMES THEN PUT ON RUN SCOOTER ADJUST IF NEEDED
106 questions posted
Usually answered in minutes!
122 Questions
86 Questions
71 Questions
72 Questions
53 Questions
