1991 Yamaha XJ 600 "heat" Questions

Currently trying to fit heated grips with the recommendation of using special glue. Problem - existing grips appear also to be glued solid. Any sugestions on how to remove without a stanly knife? ...

...parts showing through. i have read that it can be dangerous as it could cause the bike to over heat. as im planning on spraying a thin layer just to 'touch it up', would this be a problem? also, ...

...in after 5 mins and i have to clean plugs to get it going again Go get a set of spark plugs one heat range hotter than stock. Also get the stock main jets for your bike. Check your pilot jet size ...

Is there a fix for the excessive heat that comes off of the engine of the 2005 yamaha fjr 1300? i have a heat shield blanket between the tank and teh engine, foam in both side cowling to forcr the ...

cant break loose head bolts THE BEST WAY IS TO HEAT THEM. NO FLAMES!!! HEAT GUN . HEAT AT BASE OF CYLINDER IN CASE THERS LOCTITE ON THEM HEAT HELPS IT TO BREAK FREE.

...remove lower rear caliper bolt. Feels like its welded in place. I've gone thru a couple of tools, heating up with propane torch. Not sure how hot to make it.... When you want to remove that bolt ...

Extreme Heat 2007 FLHTCUI - WAY TOO MUCH HEAT COMING OUT ON RIGHT SIDE, ESPECIALLY FOR PASSENGER. HARLEY NO HELP. THEY TELL ME IT IS BECAUSE OF CA EMISSIONS. I had the same problem & fixed it by ...

Heat questions heat from the exhaust. The rear header pipe is in very close proximity to the shock. The front header pipe is not far from the oil tank and oil coolers. I don't care for the looks of ...

...not give the room size, window (glazed, double pane), Roof (open or ceiling tile). * Are there any 'heating' appliances in the same room? Oven, stove, water heater, space heater, Clothing Iron, ...

why does my 2003 honda goldwing motorcycle heat up at slow speeds while traveling at 15 to 20 mph it heats up Normally it will heat up and it must be seen if this is a malfunction ONLY if the heat it ...