...and there is a bolt with a nut out the back of the swing arm. Turn the nut in the same amount on both side till the chain has 1/2 inch of movement up and down and tighten the Axel nut to 80 ft
...swing arm parallel to the ground, (this is the tightest point in the arc of the swing arm moving rotation), at that point you want to be able to put two finger between the chain and the swing arm at ...
...swing arm removed belt put behind swing n arm and the wheel losened and slide the wheel forward dont force the belt and after 100miles check the belt tension if so adjust it and also you will require ...
2006 c90 swing arm bearing replacement torqe specification for swing arm bearing how do you remove the swing arm from susuki c90
Question about Harley Davidson Motorcycles
...swing arm off of a 1982 harley davidson Raise rear tire off ground. Loosen chain adjusters, loosen and remove axle nut and remove axle. Remove chain from rear sprocket. Remove bolt from lower shock ...
...swing arm into a short spacer, through right wheel bearing, internal spacer, left wheel bearing out the left side through a longer spacer, and then the swing arm and then on the axle you will have a ...
Question about Motorcycles
...swing arm pivot bolt out. Wont budge a mm. Have a bolt on it still to have something to brace and hammer onto. What the heck do we do? Lol Hi Ashley There is no other way, but with gentle brut force. ...
Question about Yamaha FZR 600 Motorcycles
...swing arm removal tool 1997 Shadow. Thanks Special tool part number for removal of rear swing arm Question edited for clarity. Question moved to one of the 8 Honda Shadow categories. Honda OE part ...
...swing arm bearings on 1970 sportster Get the bike up off the ground and make sure it's secure. Remove the rear wheel and the rear shocks. Look for anything else that may be attached to the swing arm ...
should there be & could I make a bushing out of molebdenum? Lay the bike on its side. Superglue the bush to the swing arm. Lay the bike over the other way and repeat. Do not glue the bush to the shaft
55 questions posted
Usually answered in minutes!
122 Questions
105 Questions
86 Questions
71 Questions
72 Questions