1989 Yamaha FZR 600 "getting" Questions

...regulator its on you seat fairing left side .get a volt meter start the bike and see if your getting 13.5-14.5 volt when running the motor,you should get no less then 12 volt when the motor is ...

How hot should the voltage regulator get? Mine gets to hot to touch.Is that a problem and what will cause that They do get warm that is why they have finning to work as a heat sink. If the wires going

fzr 600 not getting spark i think its getting gas but is yet to start changed plugs unpluged the stator and tried to start it motor sounded the same so i would say it was just rebuilt coil may be bad ...

...starving for fuel it has started but the exhaust if you are setting on it the 2 on the left are not getting warm???? sounds like those cylinders are not firing, hence no heat ! find a spare sparkplug ...

Hey Terry Stevens,you responded to my question,(how hot should the voltage regulator of my 92 FZR 600 get) and it is what it is the three white wires coming out of the alternator were hard & b

Does anyone have a wiring diagram for 89 yamaha FZR 600 Horn connection? I think the owners before disable the horn to use as airshifter.. Now I can't get the horn to work. if I remember correctly, ...

i lost my last key and need the keycode to get a new one. can i find out how to get it without tearing my bike apart to my knowledge yamaha don't keep the codes on file. its cheaper and fairly easy to

I need to replace the timingchain tenisoner but not sure how. Do i need to pull motor? No you do not need to pull the engine. Infact if your lucky you can get to only by removing the let and right ...

help please, my yamaha is is not running smooth help please, my yamaha FZR 400rr is is not running smooth below 4k rpm, above 4k is fine. and to add up its not idling, i have to hold on the gas at 2k ...

...it wasn't firing so we checked the spark plugs to see if they were firing and they were so we getting gas to the carbs everything looks to be working so we try to turn the engine over and ...