...rear swing arm to see if it moves or wiggles at the pivot points. You probably have bad swing arm bearings. If the swing arm bearings are bad you will probably have to change both bearings and the ...
...rear tire bolt to knock through to change tire and tube It sounds like the axle (bolt) is corroded/rusted inside the wheel. If this is in fact true you need to carefully drive it out with a proper ...
...CHANGE DURING TIGHTENING. If you need to adjust the rear drive belt tension, remove the snap ring and loosen axle nut on the right side of the axle. The left adjustment cam is welded to the axle and ...
...change the rear tire, and i dont know how to take off the rear wheel, dont want to take anything apart that i shouldnt If you're having problems getting the wheel off, it might be advisable to simply ...
...change to rear tire I need to know how to change the rear tire on a h.d. 2008 flhr To remove a 2008 Touring rear wheel FIRST raise the bike with the rear wheel off the ground, remove the saddlebags, ...
rear wheel alinement Not sure what you are asking? The wheel alignment should align when you adjust your belt deflection by the axle cam.Unless you have changed the swing arm or any bearings or ...
...change.When the rear wheel is of the ground on a stand and the first gear is engaged at idle the drive action is again lumpy, on acceleration the lumpiness begins to even out? The engine appears to ...
...rear spoke tension( if it has spokes) Head bearings\twisted forks swing arm bushes change front fork oil\check suspension settings loose axle bolts bent discs string line the wheels bent frame or ...
...rear tire to change the tire Basically, you jack up the bike, take the nut off the axle and pull it out. There will be some spacers that come out when you pull the axle out. One will be in each wheel ...
10 questions posted
Usually answered in minutes!
32 Questions
21 Questions
10 Questions
12 Questions
10 Questions
