1988 Yamaha FZR 250 "throttle cable" Questions

...CABLE,THROTTLE 2 3FH-26312-00-00 http://www.yamahapartsdepot.com/fiche_section_detail.asp?section=9996&category=Motorcycles&make=YAMAHA&year=1988&fveh=263 Price $21.21each (2

throttle cable like anything else. In the cable somewhere (usually close to the throttle grip) it has an adjuster. There should be two cables, a throttle cable and an idle cable. The throttle cable is

...throttle cable on 2002 dyna super glide 2002 make how do I remove throttle cable REMOVAL Loosen the cable adjuster jam nuts, screw the throttle cable adjuster until it is as short as possible, remove ...

...throttle cable on a 1973 flh and get the length right? If you're talking about the old style throttle cable that is internal of the handlebar, it's pretty straight forward. Remove the throttle grip, ...

...throttle cable There are two cables leading to the throttle. Both have two pieces. Cable 1 goes from the throttle about 12" long and connects to an adjustment piece joining it to cable2 which goes to ...

...throttle cable. With the engine off, twist the throttle to wide open throttle and let go of the throttle grip. The throttle should snap shut. If not, loosen the cables a bit or back the throttle grip ...

throttle cable replacing What year model. Take tank off. Take cover off throttle on handle bars. Release tension on throttle cable by loosening cable adjusters. Release cable from carburetor. Release ...

...throttle cable, first loosen the adjustment on both cables getting as much slack as possible in both cables. Then remove the two screws that hold the right switch housing together. Carefully seperate ...

...throttle cable on a 1980 harley sportster Ok, you should have two cables on your Sportster. One is the throttle cable that pulls the carb open and the other is the idle cable that acts as "safety ...

throttle cable from the carb/throttle body. Then take the two bolts out of the throttle grip housing halves and carefully seperate them. Remove the old cables from the twist grip. Reinstall new cables