1987 Yamaha FZR 1000 "unstick bowls" Questions

...If bike has been laid up for more than a few months then replace the fuel in the tank & carbs Tap the carb bowls sharply with a hammer handle to unstick the floats Ride ...

...Old gas has glued the needle and float in place . Remove the carburetor , take off the bowl , unstick the float and needle, clean the parts with carburetor cleaner , and reassemble the ...

...staying open in float bowl in bottom of carb.Try tapping float bowl with screw driver handle as to unstick floats.this will somtimes work if there not stuck real bad.If it still overflows you need

How can you unstick a stuck float? If this is to try and stop a carburetor from flooding, tap the side of the float bowl with the handle of a screwdriver. This helps the needle seat correctly and stop

how to unstick the float in yz 250 Try tapping the carb with the wooden or plastic handle of a small hammer, or screwdriver, otherwise, you need to remove the bottom bowl, and then the float pin, to ...

...fix it? may be a stuck float in the carb. Sometimes a sharp rap to the carb can cause the float to unstick. If this doesn't do it possible trash in float needle seat requiring float bowl removal to ...

...advice is welcome A quick fix - try tapping the carb bowl with screwdriver handle a few times to unstick the needle

...clear, I would think that the float is probably stuck. If you tap lightly on the float bowl it may unstick. Just use the back of a screwdriver or something like that. Just don't dent the cover. If ...

...this? Thanks Larry sounds like the float is stuck in the carburetor take the bottom bowl off and unstick da floats. clean ...

...is clogged up. sometimes you can tap on the bowl with the plastic end of a screwdriver to get it to unstick. 3. count the number of turns clockwise to gently seat the idle mixture screw-write down ...