1987 Yamaha FZR 1000 "timing lined work valves" Questions

...work done to it. Assembled the engien and set the timing put new plugs in it. and filled the tank with gas. Hit the started and all it does is crank over, pulled the plugs and checked for spark ...

...work all of the time. hi i have a superbyke m-ped 50cc qmb139 an ive had the same problem ive done everthing to try fix includeing changeing carb then today a freind suggested checking my valves my ...

My 2008 Honda shadow spirit wont start. I bought a new battery and replaced the plugs. I get a sound like it wants to start but can't. What should i do? My 2006 done the same thing and after spending ...

...you could have a bent valvevor valves inspect valves check timing chain sprockets marks line up as in manual count links to see if ok if not head will have to come off see what poss damage could ...

...Timing marks were lined up but is there a way to fine tune timing? The valve timing is a static setting. As a rule it will either work or not. The only adjustment is usually the ignition timing. I ...

...timing in a 2004 rmz 250 With the valve rocker covers off and magneto inspection plug and centre plug removed, turn motor using nut on magneto, counter-clockwise until a line appears centrally in the ...

Replacing the Brake Fluid on the suzuki intruder when i changed the fluid in the main cylinder of my 800 suzuki intruder, i lost some pressure in the clutch line. I tried bleeding the line through the

My 2005 yamaha TTR 125 will not let gas flow into the carb bowl, you can pour gas into it and it starts right up, thanks! Your float in the bottom of the carb is likely stuck in the up position. The ...

I just shipped my bike, and now it wont start. It turns over, and all the electronics are working, but nothing else. Was it stored for some time before being shipped? If so, you may need to remove the